طقم من 8 مشابك تثبيت سريعة Lenzkes K16 (سلسلة K)Lenzkes
K16 Quick Mold Clamp (K-Line)
طقم من 8 مشابك تثبيت سريعة Lenzkes K16 (سلسلة K)
Lenzkes
K16 Quick Mold Clamp (K-Line)
الحالة
مستعمل
الموقع
Trenčianske Stankovce 

البيانات الأساسية
- اسم الماكينة:
- طقم من 8 مشابك تثبيت سريعة Lenzkes K16 (سلسلة K)
- الشركة المصنعة:
- Lenzkes
- الحالة:
- جيد جدًا (مستعمل)
السعر والموقع
- موقع البائع:
- 3011 Sedličná, 913 11 Trenčianske Stankovce, سلوفاكيا

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A23339780
- رقم المرجع:
- 260372
- تحديث:
- آخر مرة في 16.11.2026
وصف
Set of 8x Lenzkes K16 Quick Mold Clamp (K-Line)
These are mechanical mold clamps (quick-release clamps) by LENZKES ,
series 100-16K (with T-slot nut), designed for injection molding machines.
There are 8 pieces in total shown in the photos.
Technical Parameters (Lenzkes 100-16K)
1. Manufacturer: Lenzkes Spanntechnik GmbH (Germany)
2. Model / Type: 100-16K (casting markings on both the body and bottom T-nut: 100-16K / K16)
3. Quantity in photos: 8 pcs
4. Bolt thread: M16 (strength class 12.9, internal hexagon socket)
5. T-slot width: 16 mm (per the 16K designation – T-slot nut with self-aligning swivel joint)
Hfodpfo Akk Efsx Ap Ijp
6. Maximum clamping force: 45 kN (approx. 4.5 tons per clamp)
7. Tightening torque: 150 Nm
8. Clamping height: steplessly adjustable (typically 0 – 45 mm without the need for shims/packing)
9. Application: clamping injection molds onto injection molding machine platens
These are mechanical mold clamps (quick-release clamps) by LENZKES ,
series 100-16K (with T-slot nut), designed for injection molding machines.
There are 8 pieces in total shown in the photos.
Technical Parameters (Lenzkes 100-16K)
1. Manufacturer: Lenzkes Spanntechnik GmbH (Germany)
2. Model / Type: 100-16K (casting markings on both the body and bottom T-nut: 100-16K / K16)
3. Quantity in photos: 8 pcs
4. Bolt thread: M16 (strength class 12.9, internal hexagon socket)
5. T-slot width: 16 mm (per the 16K designation – T-slot nut with self-aligning swivel joint)
Hfodpfo Akk Efsx Ap Ijp
6. Maximum clamping force: 45 kN (approx. 4.5 tons per clamp)
7. Tightening torque: 150 Nm
8. Clamping height: steplessly adjustable (typically 0 – 45 mm without the need for shims/packing)
9. Application: clamping injection molds onto injection molding machine platens
تم حذف إعلانك بنجاح
حدث خطأ

















