آلة ربط الحواف حتى ارتفاع لصق 100 ممLange Maschinenbau
B 70 K-100
آلة ربط الحواف حتى ارتفاع لصق 100 مم
Lange Maschinenbau
B 70 K-100
سنة الصنع
٢٠١٨
الحالة
مستعمل
الموقع
ألمانيا 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- آلة ربط الحواف حتى ارتفاع لصق 100 مم
- الشركة المصنعة:
- Lange Maschinenbau
- طراز:
- B 70 K-100
- سنة الصنع:
- ٢٠١٨
- الحالة:
- مستعمل
السعر والموقع
- الموقع:
- D - Hessen

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A19137466
- رقم المرجع:
- ISSH20230727-4468
- تحديث:
- آخر مرة في ٢٨.١٠.٢٠٢٥
وصف
Used machine
Year of manufacture: 2018
Special feature: Machine for up to 100 mm edge height!
Condition: Factory-inspected by Lange Maschinenbau
Equipment and technical data:
- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
Iedpfx Aaswka S Isvjar
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Pneumatic connection: 6 Bar
Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Availability: short-term
Location: Flörsheim
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Year of manufacture: 2018
Special feature: Machine for up to 100 mm edge height!
Condition: Factory-inspected by Lange Maschinenbau
Equipment and technical data:
- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
Iedpfx Aaswka S Isvjar
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Pneumatic connection: 6 Bar
Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Availability: short-term
Location: Flörsheim
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
إرسال طلب
هاتف & فاكس
+49 6146 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Piaseczno
٢٬٩٢٩ km
آلة قطع الورق
iEchoTK4s
iEchoTK4s
إعلان صغير
رومانيا
٢٬١٩٠ km
ماكينة تعشيش CNC مع تحميل وتفريغ
NanxingNCG3021L
NanxingNCG3021L
إعلان صغير
Zaandam
٣٬٥٧٩ km
آلة لصق الصناديق القابلة للطي
BrausseForza 1100 C3
BrausseForza 1100 C3
إعلان صغير
Neckar-Odenwald-Kreis
٣٬١٢٢ km
آلة طحن محور الدوران
Panhans259
Panhans259
إعلان صغير
Ponte di Piave
٢٬٦٥٧ km
مركز العمل
HOMAGCENTATEQ E-310
HOMAGCENTATEQ E-310
إعلان صغير
Radom
٢٬٨٥٣ km
رباط الكمال
FastbindPUREVA XT
FastbindPUREVA XT
إعلان صغير
إيطاليا
٢٬٣٦٠ km
آلة ربط الحافة من جانب واحد
BIESSESTREAM B/11.5
BIESSESTREAM B/11.5
إعلان صغير
Hemhofen
٣٬٠٦٠ km
نظام التشريب
BachhäublHS2 12,5
BachhäublHS2 12,5
إعلان صغير
Gebhardshain
٣٬٢٩٨ km
آلة لحام
JäckleMig 505 / MC 16
JäckleMig 505 / MC 16
تم حذف إعلانك بنجاح
حدث خطأ


























































































































































