آلة ثني الأنابيب

Lang Maschinenbau EL-HY 168 F

Pipe diameter: 168.3 x 11 mm
Pipe insertion length: 6000 mm
Maximum bending radius: 700 mm
Control system: Siemens 840 D
Minimum bending radius: 80 mm
Maximum bending angle +/-: 190 °
Connected load: 400 V / 50 Hz / 85 A
Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m
Machine weight approx.: 33 t

Additional information:
- CNC control: CNC MMI Multicontrol 2000
- Control system NCU
- PLC: Siemens Simatic S7
- Electrical connection: 400V / 50 Hz / 85 A
Lodpoya Ebrsfx Abgohb

The machine is fully automatic and equipped with a tool changer.

The following tooling is available:

Pipe Ø 48.3 mm; Radius 105 mm
Pipe Ø 60.3 mm; Radius 120 mm
Pipe Ø 63.5 mm; Radius 150 mm
Pipe Ø 76.1 mm; Radius 190 mm
Pipe Ø 88.9 mm; Radius 222 mm
Pipe Ø 114.3 mm; Radius 285 mm
Pipe Ø 139.7 mm; Radius 350 mm
Pipe Ø 141.3 mm; Radius 700 mm
Pipe Ø 168.3 mm; Radius 420 mm

A few mandrels have a direct engraved marking.

These have the following specifications:

88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm;
139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm

The following outside diameters of the mandrels were measured:

23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm

The accessory package is valued at approximately €150,000.

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.