ماكينة الطحن ذات الحزام المزدوج، نوع ZBSKuhlmeyer
ZBS 3Ex
ماكينة الطحن ذات الحزام المزدوج، نوع ZBS
Kuhlmeyer
ZBS 3Ex
EXW سعر ثابت دون ضريبة القيمة المضافة
١٣٩٬٠٠٠ €
سنة الصنع
٢٠٢٢
الحالة
آلة عرض
الموقع
Piaseczno 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- ماكينة الطحن ذات الحزام المزدوج، نوع ZBS
- المصنّع:
- Kuhlmeyer
- الموديل:
- ZBS 3Ex
- الرقم المتسلسل:
- 23 03 28 / 1
- سنة الصنع:
- ٢٠٢٢
- الحالة:
- كالجديدة (آلة عرض)
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
EXW سعر ثابت دون ضريبة القيمة المضافة
١٣٩٬٠٠٠ €
- الموقع:
- Mazurska, 18, 05-500 Piaseczno, Polska

اتصل
تفاصيل العرض
- معرّف القائمة:
- A16565521
- التحديث الأخير:
- في ٢٩.٠٧.٢٠٢٥
الوصف
TWIN BELT GRINDING MACHINE TYPE ZBS
for manual grinding, satin finishing and polishing
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
Rjdjt Hvkvopfx Ah Ien
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
for manual grinding, satin finishing and polishing
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
Rjdjt Hvkvopfx Ah Ien
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مستندات
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2019
تقديم الطلب
الهاتف & فاكس
+48 22 42... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Mudersbach
٣٬٢٩٨ km
آلة ثني 3 أسطوانات
FastechFRM 1050 x 90
FastechFRM 1050 x 90
إعلان صغير
Enschede
٣٬٤٦٣ km
آلة ثني دائرية
OSTASSM 700 x 76
OSTASSM 700 x 76
إعلان صغير
Allendorf (Eder)
٣٬٢٧٩ km
آلة صنفرة طويلة الحزام
KBM Maschinenbau GmbHMS93-150
KBM Maschinenbau GmbHMS93-150
إعلان صغير
Hódmezővásárhely
٢٬٣٦٩ km
طاحونة السطحية
Made in TaiwanAM1545 AH
Made in TaiwanAM1545 AH
إعلان صغير
Kassel
٣٬٢٦٤ km
آحرون
FendtFormer 14055 PRO Gen 2
FendtFormer 14055 PRO Gen 2
إعلان صغير
Allendorf (Eder)
٣٬٢٧٩ km
آلة صنفرة طويلة الحزام
KBM Maschinenbau GmbHM2S92-150
KBM Maschinenbau GmbHM2S92-150
إعلان صغير
Bad Oeynhausen
٣٬٣٧٢ km
طاولة تلميع
KuhlmeyerPSK
KuhlmeyerPSK
إعلان صغير
Thalheim bei Wels
٢٬٧٨٥ km
آلة صنفرة طويلة الحزام
OSTERBERGERKSBP 2500 Universal
OSTERBERGERKSBP 2500 Universal
إعلان صغير
Cantù
٢٬٨٤٦ km
مطحنه حزام طويل
FBR - ITALYL/93
FBR - ITALYL/93
تم حذف إعلانك بنجاح
حدث خطأ

































































