آلة تصنيع دفاتر الملاحظاتKugler
KUGLER Automation 317
آلة تصنيع دفاتر الملاحظات
Kugler
KUGLER Automation 317
سنة الصنع
١٩٩٩
الحالة
مستعمل
الموقع
Neuhausen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- آلة تصنيع دفاتر الملاحظات
- المصنّع:
- Kugler
- الموديل:
- KUGLER Automation 317
- سنة الصنع:
- ١٩٩٩
- الحالة:
- مستعمل
السعر والموقع
- الموقع:
- 75242 Neuhausen-Schellbronn, Deutschland

اتصل
تفاصيل العرض
- معرّف القائمة:
- A21130152
- التحديث الأخير:
- في ٣٠.٠١.٢٠٢٦
الوصف
For the production of writing pads with cover sheet
Width: min. 105 mm, max. 330 mm
Length: min. 148 mm, max. 355 mm
Block thickness: min. 3 mm
Rbjdjyf I Skopfx Ac Hot
Block thickness: max. 15 mm
Manufacturing process:
The unglued blocks cut to size are manually laid onto the feed station in by hand.
The further process follows automatically.
The blocks are aligned and pushed into a magazine drum. These are then glued to the head side with hot glue and dried. Subsequently, the blocks are fed further and the envelope is grooved, supplied,
glued and struck around the block. Finally, the finished blocks are laid out on a table.
Width: min. 105 mm, max. 330 mm
Length: min. 148 mm, max. 355 mm
Block thickness: min. 3 mm
Rbjdjyf I Skopfx Ac Hot
Block thickness: max. 15 mm
Manufacturing process:
The unglued blocks cut to size are manually laid onto the feed station in by hand.
The further process follows automatically.
The blocks are aligned and pushed into a magazine drum. These are then glued to the head side with hot glue and dried. Subsequently, the blocks are fed further and the envelope is grooved, supplied,
glued and struck around the block. Finally, the finished blocks are laid out on a table.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2010
تقديم الطلب
الهاتف & فاكس
+49 7234 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


















