كراوس مافاي KM 200-1000 C2KraussMaffei
KM 200-1000 C2
كراوس مافاي KM 200-1000 C2
KraussMaffei
KM 200-1000 C2
سنة الصنع
٢٠٠٣
الحالة
مستعمل
الموقع
ألمانيا 

البيانات الأساسية
- اسم الماكينة:
- كراوس مافاي KM 200-1000 C2
- الشركة المصنعة:
- KraussMaffei
- طراز:
- KM 200-1000 C2
- سنة الصنع:
- ٢٠٠٣
- الحالة:
- جاهز للاستخدام (مستعمل)
- ساعات التشغيل:
- ٤٨٬٥٠٠ h
السعر والموقع
- الموقع:
- , ألمانيا

اتصل
تفاصيل فنية
قوة التثبيت:
٢٬٠٠٠ كيلو نيوتن
تفاصيل العرض
- معرّف الإعلان:
- A23328149
- رقم المرجع:
- DE-INJ-KRA-2003-00010
- تحديث:
- آخر مرة في 12.11.2026
وصف
Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM 200-1000 C2 features a fully hydraulic 2-platen clamping system and a complete thermoplastic plasticizing unit. It includes a robust screw diameter of 55 mm and an advanced MC4 32-bit microprocessor control system. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 200-1000 C2 machine we have for sale. Contact us for further details.
• Clamping System: Fully hydraulic 2-platen clamping system
• Operating Hours (Pump/Machine): 48,465 h
Hedpfxe Ai Spzj Ap Isnw
• Operating Hours (Automatic/Cycle): 42,286 h
• Regulation: PV-control for injection speed, holding pressure, and back pressure
• Plasticizing Unit: Complete thermoplastic plasticizing unit in wear-resistant execution (abrasion and corrosion protection for injection units Sp 90 with Sp 3500)
• Screw Diameter: 55 mm
• Nozzle: Open nozzle (nozzle radius 10.00 mm, nozzle bore 4.00 mm) + mechanically controlled shut-off nozzle SVN (make: Bernex, Herzog system)
• Non-Return Valve & Drive: Hydraulic screw non-return lock (04.01) and hydraulic screw drive with standard speed (07.20)
• Operating Voltage: 3-Phase ~ 400 V / 230 V (Euro voltage with neutral conductor)
• Frequency: 50 Hz
• Total Nominal Current (IN - Gesamt): 154 A
• Motor Current (I - Motor): 72 A
• Pre-fuse (Vorsicherung): 160 A
• Pump Motors: Insulation class F
• Clamping System: Fully hydraulic 2-platen clamping system
• Operating Hours (Pump/Machine): 48,465 h
Hedpfxe Ai Spzj Ap Isnw
• Operating Hours (Automatic/Cycle): 42,286 h
• Regulation: PV-control for injection speed, holding pressure, and back pressure
• Plasticizing Unit: Complete thermoplastic plasticizing unit in wear-resistant execution (abrasion and corrosion protection for injection units Sp 90 with Sp 3500)
• Screw Diameter: 55 mm
• Nozzle: Open nozzle (nozzle radius 10.00 mm, nozzle bore 4.00 mm) + mechanically controlled shut-off nozzle SVN (make: Bernex, Herzog system)
• Non-Return Valve & Drive: Hydraulic screw non-return lock (04.01) and hydraulic screw drive with standard speed (07.20)
• Operating Voltage: 3-Phase ~ 400 V / 230 V (Euro voltage with neutral conductor)
• Frequency: 50 Hz
• Total Nominal Current (IN - Gesamt): 154 A
• Motor Current (I - Motor): 72 A
• Pre-fuse (Vorsicherung): 160 A
• Pump Motors: Insulation class F
تم حذف إعلانك بنجاح
حدث خطأ













