آلة صنفرة ذات حزام عريض

Kündig Perfect-3 1350 REdXi_LL/BS verfügbar

Automatic sanding machine KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structure unit

Robust 3-belt sanding machine for the highest demands Constant working height thanks to top section adjustment
Working width 1350 mm
Passage height max. 205 mm (up to 18.5 kW main drive motor) Sanding belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Sanding belt dimensions for "Xi-L": 150 x 4700 mm
Unit "R" contact roller
➢ Grooved rubber contact roller hardness 80 Sh
➢ Contact roller level infinitely height-adjustable via touch screen ➢ Motorized lifting/lowering of the contact roller according to unit selection ➢ Increased sanding belt speed
Unit "Ed-L" sanding pad diagonal
➢ Electronic sanding pad with segment width 22 mm (swiveling special version), with variable edge pressure, automatic pressure control and storage of the sanding pad segments
➢ Infinitely variable sanding belt speed (with PLC storage)
➢ Additional sanding pad insert
"Xi-L" cross sanding unit in the machine frame
Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure control and storage of the sanding pad segments
➢ Cross sanding belt supported by lamellar belt
➢ Infinitely variable sanding belt speed (with PLC storage)
Perfect-3 1350-REdXi-LL
- Main motors
➢ 1st unit: 18.5 kW (25 hp) / ➢ 2nd unit: 11 kW (15 hp) / ➢ 3rd unit: 16 kW (MPM) (22 hp) /
400 V/50 Hz 400 V/50 Hz 400 V/50 Hz
- Workpiece feed
➢ Fabric-reinforced rubber transport carpet ➢ Rubberized carpet drive roller
➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz
➢ Speed: infinitely variable 3 - 15 m/min
- Vacuum device
➢ On feed table
➢ Additional perforation of the transport carpet over 200 mm
➢ Vacuum generator: 2.2 kW (3 hp) / 400 V/50 Hz
- Sanding belt cleaning
➢ Air blade for sanding belt cleaning of the two units "Ed-L" and "Xi-L"
insert-controlled, with suction ducts and driven by blower 1.1 kW (1.5 HP) 400 V/50 Hz
- Pressure elements ➢ Inlet:
➢ Intermediate units: ➢ Outlet:
parallel spring-loaded, ground steel pressure roller ⌀ 50 mm rubberized pressure roller ⌀ 50 mm
Rubberized pressure roller ⌀ 50 mm


1. grooved rubber contact roller, 80 sh.
2.diagonal sanding pad with lacquer finish and air blade for sanding belt cleaning
3.cross sanding unit with lacquer equipment and air blade for sanding belt cleaning

Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz

Additional equipment:
W61: Structuring burr at the outlet
B 10: Structuring brush Abralon, Mink

W71: Additional quick-change shaft for brush 1350
B 12: Brass-plated steel wire brush 1350

C 10: LED package

A 20: 5 x motorized regulating flaps (2x D=180 + 3 x D=150)

Working width 1350 mm
Max. passage 205 mm
Sanding belt dimensions: 1350x2000 mm and 150x4700 mm
10" touch screen with Industry 4.0 control
Guedpfsr Hr Dzox Abxsh

Location: ex stock 54634 Bitburg
- immediately available -

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.