KBA40/11000Jansen Maschinen GmbH
KBA40/11000
KBA40/11000
Jansen Maschinen GmbH
KBA40/11000
سنة الصنع
٢٠١٧
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Rastdorf 

البيانات الأساسية
- اسم الماكينة:
- KBA40/11000
- الشركة المصنعة:
- Jansen Maschinen GmbH
- طراز:
- KBA40/11000
- رقم الماكينة:
- 17.018.011
- سنة الصنع:
- ٢٠١٧
- الحالة:
- مستعمل
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
- الموقع:
- Rastdorf, ألمانيا

اتصل
تفاصيل فنية
محاور
أقصى سرعة للمغزل:
٣٬٠٠٠ دورة/دقيقة
تفاصيل القدرة
جهد الدخل:
٣٨٠ V
نوع تيار الإدخال:
ثلاثي الطور
التوثيق والشهادة
توثيق / دليل
مواد/منتجات قابلة للمعالجة
الوزن الأقصى لقطعة الشغل:
٣٬٥٠٠ كجم
مواصفات المحور
مسافة الحركة محور X:
١١٬٠٠٠ مم
مسافة الحركة لمحور Y:
٥٠٠ مم
مسافة الحركة لمحور Z:
٥٠٠ مم
السرعة السريعة للمحور Z:
٥ م/دقيقة
الحركة السريعة للمحور X:
٢٠ م/دقيقة
تغذية سريعة محور Y:
١٠ م/دقيقة
مزيد من التفاصيل
قدرة الحفر:
٤٠ مم
سرعة الدوران متغيرة بلا حدود
تفاصيل العرض
- معرّف الإعلان:
- A23345423
- تحديث:
- آخر مرة في 17.11.2026
وصف
The CNC drilling machine KBA 40 is a development specifically designed for craft businesses and metalworking companies. Time-consuming measuring, marking, and center-punching are no longer necessary.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Iedpfe Akrktjx Akgoii
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Iedpfe Akrktjx Akgoii
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مستندات
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد على الإنترنت: البارحة
مسجل منذ: 2026
٢ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 5956 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ














