مقطورة مفتوحةHUMBAUR
MTKA 354722 Multifunktionsanhänger
مقطورة مفتوحة
HUMBAUR
MTKA 354722 Multifunktionsanhänger
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٦٬٨٩١ €
سنة الصنع
٢٠٢٦
الحالة
جديد
الموقع
Nürnberg 

بيانات عن الآلة
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٦٬٨٩١ €
- الموقع:
- Hutbergstr. 27, 90475 Nürnberg, Deutschland

اتصل
تفاصيل فنية
- وزن فارغ:
- ٩٦٥ كجم
- الوزن الأقصى للحمولة:
- ٢٬٥٣٥ كجم
- الوزن الإجمالي:
- ٣٬٥٠٠ كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- ٤٬٧٠٠ مم
- عرض مساحة التحميل:
- ٢٬١٨٠ مم
- ارتفاع مساحة التحميل:
- ٢٠٠ مم
- الطول الكلي:
- ٦٬٢٥٠ مم
- العرض الكلي:
- ٢٬٣٠٥ مم
- الارتفاع الكلي:
- ١٬٦٩٠ مم
- معدات:
- رافعة خلفية
تفاصيل العرض
- معرّف الإعلان:
- A22120848
- تحديث:
- آخر مرة في 15.06.2026
وصف
Allcomfort Tandem Multifunctional Trailer MTKA 354722
Price: €8,200 including 19% VAT, including a 6.4% delivery fee, and vehicle documents.
Description:
It makes every job as comfortable as possible for you:
You can easily tilt the hydraulic bridge with a hand pump; gas springs assist you in operating the ramp.
The low loading height of 640 mm (single-axle) or 650 mm (tandem-axle) ensures a very shallow ramp angle.
To help you effortlessly load the vehicles onto the trailer, a sturdy, optionally available winch stand with a winch is available.
The well-designed chassis technology of the MTK Allcomfort ensures exceptionally smooth driving.
Technical Data:
Trailer type: Two-axle
Construction: Aluminum
Weight: 965 kg
Total weight: 3,500 kg
Payload: 2,535 kg
Internal length: 4,700 mm
Overall length: 6,250 mm
Internal width: 2,180 mm
Overall width: 2,305 mm
Internal height: 200 mm
Kdjdpfx Adozdcpujron
Overall height: 1,690 mm
Loading height: 650 mm
Tires: 13 inches
Standard Equipment:
Bolted, hot-dip galvanized chassis
Welded, hot-dip galvanized tilting bridge
Tilting bridge with double-acting hydraulics
Side walls made of aluminum
Wooden floor, 18 mm
8 pairs of lashing points with a length of 4700 mm, each with a lashing force of 400 kg in the outer frame, DEKRA tested
Ramp approximately 900 mm high with special punched holes and gas springs.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Price: €8,200 including 19% VAT, including a 6.4% delivery fee, and vehicle documents.
Description:
It makes every job as comfortable as possible for you:
You can easily tilt the hydraulic bridge with a hand pump; gas springs assist you in operating the ramp.
The low loading height of 640 mm (single-axle) or 650 mm (tandem-axle) ensures a very shallow ramp angle.
To help you effortlessly load the vehicles onto the trailer, a sturdy, optionally available winch stand with a winch is available.
The well-designed chassis technology of the MTK Allcomfort ensures exceptionally smooth driving.
Technical Data:
Trailer type: Two-axle
Construction: Aluminum
Weight: 965 kg
Total weight: 3,500 kg
Payload: 2,535 kg
Internal length: 4,700 mm
Overall length: 6,250 mm
Internal width: 2,180 mm
Overall width: 2,305 mm
Internal height: 200 mm
Kdjdpfx Adozdcpujron
Overall height: 1,690 mm
Loading height: 650 mm
Tires: 13 inches
Standard Equipment:
Bolted, hot-dip galvanized chassis
Welded, hot-dip galvanized tilting bridge
Tilting bridge with double-acting hydraulics
Side walls made of aluminum
Wooden floor, 18 mm
8 pairs of lashing points with a length of 4700 mm, each with a lashing force of 400 kg in the outer frame, DEKRA tested
Ramp approximately 900 mm high with special punched holes and gas springs.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد: الأسبوع الماضي
مسجل منذ: 2011
٣٦ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 911 9... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


















