مقطورة قلابة ثلاثية الاتجاهاتHUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
مقطورة قلابة ثلاثية الاتجاهات
HUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
في بي بالإضافة إلى ضريبة القيمة المضافة
٦٬١٥٠ €
سنة الصنع
٢٠٢٦
الحالة
جديد
الموقع
Nürnberg 

البيانات الأساسية
السعر والموقع
في بي بالإضافة إلى ضريبة القيمة المضافة
٦٬١٥٠ €
- الموقع:
- Hutbergstr. 27, 90475 Nürnberg, Deutschland

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
٣٬٠٠٠ كجم
وزن فارغ:
٩٤٠ كجم
الوزن الأقصى للحمولة:
٢٬٠٦٠ كجم
الطول الكلي:
٤٬٥٥٥ مم
العرض الكلي:
١٬٩١٠ مم
الارتفاع الكلي:
١٬٢٦٠ مم
طول مساحة التحميل:
٣٬١٣٠ مم
عرض مساحة التحميل:
١٬٧٤٠ مم
ارتفاع مساحة التحميل:
٤٠٠ مم
محاور وعجلات
تكوين المحور:
محورين
مقاس الإطار:
195/50 R13C
فرامل
فرامل المقطورة:
مقطورة مزودة بفرامل
تفاصيل العرض
- معرّف الإعلان:
- A23368807
- تحديث:
- آخر مرة في 22.11.2026
وصف
Humbaur three-way tipper with electric pump and Furmann steel sideboards, hot-dip galvanized, 40 cm high, for demanding applications.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Kjdpfx Apj Algdijhsnd
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Kjdpfx Apj Algdijhsnd
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2011
٤٢ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 911 9... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


























