مركز التصنيع الأفقيHitachi Seiki
HS 400
مركز التصنيع الأفقي
Hitachi Seiki
HS 400
سنة الصنع
٢٠٠٢
الحالة
مستعمل
(وظائف محدودة)
الموقع
Nordrhein-Westfalen 

مراقبة المزاد
بيانات عن الآلة
- وصف الآلة:
- مركز التصنيع الأفقي
- المصنّع:
- Hitachi Seiki
- الموديل:
- HS 400
- الرقم المتسلسل:
- HSS40050
- سنة الصنع:
- ٢٠٠٢
- الحالة:
- جاهز للاستخدام (مستعمل)
- الوظائف:
- وظائف محدودة
- ساعات التشغيل:
- ٧٢٥ h
تفاصيل فنية
- سرعة المغزل (دقيقة):
- ٣٬١٠٠ دورة/دقيقة
- أقصى سرعة للمغزل:
- ١٤٬٠٠٠ دورة/دقيقة
توفير
- الموقع:
- Nordrhein-Westfalen, ألمانيا
– المسافة: تقريباً ٣٬٣٧٣ كم
- التوفر:
- مباشرة بعد انتهاء المزاد
- شروط التسليم:
- FCA
تكاليف التفكيك والتحميل:
٢٬٣٢٠٫٠٠ € (ملزم)
٢٬٣٢٠٫٠٠ € (ملزم)
الاستلام في الموقع:
مجاني
مجاني
تكاليف الشحن:
الوصف
No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Spindle fault: The spindle has a malfunction and currently only runs stably above approx. 3,100 rpm. The cause may either be an issue with wiring in the control area or an internal defect in the spindle at low speeds.
Spindle speed stable from: 3,100 rpm
Max. spindle speed: 14,000 rpm
MACHINE DETAILS
Operating hours in machining: 725 h
Operating hours under load: 478 h
EQUIPMENT
- FANUC control with SEICOS interface
- Dual pallet changer
- Machine table adjustable in 1° increments
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
معالجة المدفوعات
- تكاليف الشراء الإضافية:
- ١٨ %
- شروط الدفع:
- %100 دفعة مقدمة
- طرق الدفع:
حوالة مصرفية
تفاصيل العرض
- معرّف القائمة:
- A19933065
- الرقم المرجعي:
- AUC-2508142
- التحديث الأخير:
- في ٠٥.٠٩.٢٠٢٥
- عرض حصري:
- متوفر فقط في المزاد
معاينة
إمكانية المعاينة
الآلة تحت التيار الكهربائي
تنصح Machineseeker بشكل عام بفحص الآلات المستعملة.
جميع البيانات مُقدَّمة حسب أفضل علم وضمير – تفضلوا بالتحقق بأنفسكم في الموقع.
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير

٤٬٤٤٨ km
مركز بالقطع - أفقي
HITACHI SEIKIHS 400
HITACHI SEIKIHS 400
إعلان صغير

٣٬٢٠٨ km
مركز بالقطع الأفقي
Hitachi SeikiHS 400
Hitachi SeikiHS 400
إعلان صغير

٣٬٠٣٤ km
مركز بالقطع - أفقي
HITACHI SEIKIHS400
HITACHI SEIKIHS400
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ١٨ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
تم حذف إعلانك بنجاح
حدث خطأ