طاولة لحامHISWeld
HIS16V33015
طاولة لحام
HISWeld
HIS16V33015
سعر ثابت دون ضريبة القيمة المضافة
٤٬٨٦٢ €
الحالة
جديد
الموقع
النمسا 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٤٬٨٦٢ €
- الموقع:
- 2351 Wiener Neudorf, Österreich

اتصل
تفاصيل العرض
- معرّف القائمة:
- A21427657
- الرقم المرجعي:
- 1069-2413
- التحديث الأخير:
- في ٠٤.٠٣.٢٠٢٦
الوصف
neu
ca. 2 - 4 Wochen ab Auftr
4862 €
3000 x 1500 mm
3000 kg
755 kg
100 mm
12 mm
16 mm
THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.
Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.
3D standard welding and clamping table,
3000 x 1500 x 200 mm with Cr75M+ hard chrome plating
Table system: 16 mm
Material thickness: 12 mm
Including table substructure and standard table legs
* S355J2+N with Cr75M+ hard chrome plating
* Hole: 16 mm, material thickness: 12 mm
* Including coated table substructure
* Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing
* Table top with 2-sided fine scaling and 50 x 50 mm grid line
* Rounded edges and holes
Bjdpfxsyq Srle Ad Rswi
* Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model
ca. 2 - 4 Wochen ab Auftr
4862 €
3000 x 1500 mm
3000 kg
755 kg
100 mm
12 mm
16 mm
THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.
Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.
3D standard welding and clamping table,
3000 x 1500 x 200 mm with Cr75M+ hard chrome plating
Table system: 16 mm
Material thickness: 12 mm
Including table substructure and standard table legs
* S355J2+N with Cr75M+ hard chrome plating
* Hole: 16 mm, material thickness: 12 mm
* Including coated table substructure
* Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing
* Table top with 2-sided fine scaling and 50 x 50 mm grid line
* Rounded edges and holes
Bjdpfxsyq Srle Ad Rswi
* Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2006
تقديم الطلب
الهاتف & فاكس
+43 2236 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ











