مخرطة سويسرية

HANWHA XD10-Y2

A machine directly from the Hanwha authorized dealer HB TURNKEY (Hanwha Germany):

Hanwha CNC turning center XD10 with Fanuc 0i series control (comparable to Star SR-10J)

Bwodpegq Ravefx Anfow
MAIN SPINDLE
- Maximum turning diameter: 10mm
- Max. spindle bore diameter: 10mm
- Maximum speed [rpm]: 15,000
- Maximum power [kW]: 3.7 BUILT-IN MOTOR
- C-axis with 0.001°
- Z1 travel [mm]: 155
- Synchronously rotating guide bushing unit
- Type of guide bushing: SD125 R
- Type of collet: 1212 E

TAILSTOCK
- Maximum speed [rpm]: 10,000
- Maximum power [kW]: 1.1
- C-axis with 0.001°
- Maximum bar diameter [mm]: 10
- Max. part length, push-out in front:
- Z2 travel [mm]: 180
- Type of collet: 1212E

TOOLING OPTIONS
Tool slide X1, Y1:
- Tool holder plate for 5 external turning tools 8x8mm

Cross drilling/milling unit:
- Number: 4 driven drilling/milling spindles, ER11
- Power: [kW]: 0.55, S6000
- Front drilling attachment for 4 drill sleeves - ER11

REAR END PROCESSING
- Tool carrier for 4 tools
- 2 driven drilling/milling spindles ER11 modular
- 2 fixed drilling/milling spindles ER11 modular

AXES AND CONNECTED LOAD
Number of servo axes: 6
Number of spindle axes: 2
Rapid traverse m/min: 32m/min (Z1, Z2, Y, X2); 24m/min (X1)
Connected load [kW]: 12KVA

CONTROL
Control type: Hanwha Fanuc 0iTF series
Number of axes: 6 (X1, Z1, Y1, Y2, X2, Z2, X2)
Simultaneous 4-axis control
External operating panel with handwheel
9.5" color LCD/MDI monitor
Automatic power-off function
Program verification function (test run possible via handwheel)
Continuous thread cutting cycle
Runtime display / part counter
CF card interface
Tool radius compensation
Absolute reference point
Self-diagnosis function
Interface to bar feeder

ACCESSORIES
Leveling feet with leveling elements
Part conveyor with collecting tray
Toolbox and service tool set
Work area light
Signal lamp (3-color)
Safety door switch with locking
Maintenance and central lubrication unit (1.8 liters
lubricant volume)
Coolant flow monitoring
Coolant tank 140 L
Pneumatic blow-out device for tailstock collet
Manual and documentation in German and English
(Maintenance and operating manual incl. parameter list and test protocol)

- READY FOR IMMEDIATE USE -
We will gladly calculate and optimize the cycle time for you and set up your newly acquired machine in our facility.

WE FIND A SOLUTION - Whether standard or HB-modified.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.