نظام طلاء المسحوق

Handelsagentur Klaus Benecke Einsteigerset z.B. Felgenbeschichtung

1,000 x 1,900 x 2,000 mm powder stove, manufacturer Kigo O.E.!

1 Internal dimension length 2.000 mm
2 Internal width 1.900 mm
3 Internal height 2,000 mm
4 Outer dimension incl. thermoblock length 2,300 mm
5 Outer dimension incl. thermoblock width 2,300 mm
6 Outer dimension incl. thermoblock height 2,700 mm
7 Substructure 1 set of steel profile 50 x 50 mm
8 Walls 1 set of 1 mm galvanized sheet metal on both sides, outside RAL 5005
9 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m²
10 Oven floor 2 run-in rails for oven trolleys
11 Temperature 220°C
12 Fans 1 unit 6,000 m³/hour
13 Electric motors 1 pc. 1.1 kW, 1450 rpm, 3 F, 50 Hz
14 Thermal output 36 kW = 30,960 kcal/hour
Csdpebqk Nbsfx Ahxjrh
15 Hinged doors on one side 2 insulated with rock wool 150mm 70Kg/m²
Indirect heating via thermoblock
Thermoblock 1 set stainless steel INOX AISI 316 Heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection
16 burners 1 oven is electrically heated
1 exhaust air 1 piece device for exhaust air pipe, manual flap guide



2. powder coating booth (open spray booth)

The overspray during powder coating is collected by the suction unit.
The powder spraying booth is supplied on castors and is therefore mobile.

- The suction unit is equipped with a 60 l powder container (rollbar).
- There are 4 filters in the extraction unit as the 1st stage.
- The absolute filter is located above the cabin.

1 Powder booth dimensions Width 2,454 mm
Depth 2,400 mm
Height 2,500 mm
2 Fan 1 pc. 6,000 m³/hElectric motor 3.0 kW
3 Filter Φ 325x600 4 pcs. type filter cartridges
4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy
5 Absolute filter 1 pc. type pocket filter



3. powder coating system Wagner, - Prima Sprint -

1 Dimensions of the Prima Sprint Depth 725 mm
Width 480 mm
Height 1.100 mm
Weight Approx. 39 kg.
Mains standard 230 VAC
Frequency 50 - 60 Hz
Inlet compressed air 6-8 bar
Outlet compressed air 0.05 - 5.5 Nm³/hour


- Corona hand gun
PEM-C4 Ergo
- EPG-Sprint control unit
- Conveying unit with fluid crown ST 550/10
- Powder injector PI-F1
- Device trolley with agitator table

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.