مذيب مختبر مزود بحامل

GRIESER GFD 11 LST

Here we offer a GRIESER laboratory stand dissolver.
Product: Grieser laboratory stand dissolver
Type: GFD 11 LST
Intended use:
The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty.
Machine design:
The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller.
In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use.
The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing.
The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller.
Operation
Switching on and off is done via the corresponding buttons in the control cabinet.
Lifting the mixing tool drive
Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height.
Lowering the mixing tool drive
To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed.
Changing the mixing tool
The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced.
Technical data:
Machine type: GFD 11 LST
Year of manufacture: 2017
Operating voltage: 400 V
Frequency: 50 Hz
Control voltage: 24 V DC
Mixing tool speed: 25 – 500 min-1 via frequency inverter
Ambient temperature: +5°C to +40°C
Protection class: IP 54
Container: 1.18 liters, D=100, H=150 (75) provided by the customer
Mixing tool: stirring star, provided by the customer
Operating panel / display
The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber.
The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons.
The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu.
Lodpfxezdtflj Acdsac
The individual menu screens can be scrolled through using the up and down arrow keys.
Type: GFD 11 LST
Condition: used
Scope of supply: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by phone.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.