خط قطع الصفائح الأوتوماتيكي

Glass Serwis GL6-SLZ4/2

- thickness of glass - from 3 to 12 mm,
- maximum glass format 6100x3300 mm,
- working height 950 mm +/- 30mm. ( adapted to the line),
- overall dimensions (length x width x height) 8500x4300x1700 mm,
- feed speed on belts up to 40 m/min,
- glass feed speed on the cushion up to 40 m/min,
- power supply voltage - 400V, 50Hz,
- total installed power - 10 kW,
- compressed air supply with a pressure of 7 bar,
- maximum air consumption of 1100 NL/min,
- glass presence sensor - OK.
- automatic positioning of the glass sheet - OK.
- RAL color - according to the order,
- outer edges of the table made of hard wood,
- table top covered with black felt with a thickness of 4mm,
- guide and drive system protected against dirt,
- guides and gear rails surface hardened,
- on the bridge was mounted glass transport suckers,
- on the bridge mounted stop buffers for manual cutting of glass.
- the table has a solid frame construction,
- the table is equipped with a system of sensors (electronic and mechanical),
- top of the attachment covered with black felt with a thickness of 4mm,
- oil during cutting dispensed automatically to both wheels simultaneously.
- double-sided cutting,
- breaking of the upper cut - breaking roller,
- breaking of the bottom cut - breaking bar,
- sheet separation - cutting knife,
- adjustable parameters heating time; separation time, cutting delay - they depend on the thickness of the cut VSG.
- heating of the cutting place - a set of radiators
Ibsdpfx Aovdaf Asbxoc
- max thickness of VSG glass - not exceeding 12mm in total,
- max width of cutting 4000mm,
- working height adapted to the height of the table,
- overall dimensions of the table (length x width) 1500 x 47000 mm,
- glass transport speed - adapted to the table
- total installed power ~ 17kW
- supply voltage - 400V, 50Hz
- compressed air supply with a pressure of 7 bar,
- manual and automatic cutting function,

IV. basic technical data of glass breaking station type.GS6-3/2
- the table has a solid frame construction,
- the table has an air cushion to facilitate the movement of glass,
- control of breakers and fan is done by pedals,
- glass thickness from 3 to 12 mm,
- max glass size 3300 x 6100 mm,
- working height adapted to the height of the table,
- overall dimensions of the table (length x width) 3600 x 6000 mm,

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.