منظومة تجليخ مغناطيسية ErgomagForplan
PM 3000
منظومة تجليخ مغناطيسية Ergomag
Forplan
PM 3000
سنة الصنع
٢٠٢٣
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Pforzheim 

البيانات الأساسية
- اسم الماكينة:
- منظومة تجليخ مغناطيسية Ergomag
- الشركة المصنعة:
- Forplan
- طراز:
- PM 3000
- رقم الماكينة:
- 18439
- سنة الصنع:
- ٢٠٢٣
- الحالة:
- مستعمل
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
- الموقع:
- Hanauer Straße 5-7, 75181 Pforzheim, Deutschland

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
٢٢٠ كجم
الطول الكلي:
٨٧٥ مم
العرض الكلي:
١٬٠١٠ مم
الارتفاع الكلي:
١٬٦١٠ مم
تفاصيل القدرة
جهد الدخل:
٢٣٠ V
نوع تيار الإدخال:
ثلاثي الطور
ميزات الأمان
إيقاف الطوارئ
التوثيق والشهادة
توثيق / دليل
تفاصيل العرض
- معرّف الإعلان:
- A23342666
- تحديث:
- آخر مرة في 16.11.2026
وصف
Forplan Ergomag PM 3000 with ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, and centrifugal dryer, type 270, year of manufacture 2023.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
Hnedpfs Aknwmsx Ap Isw
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
Hnedpfs Aknwmsx Ap Isw
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد على الإنترنت: البارحة
مسجل منذ: 2026
٢ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 7231 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ














