مقطورة نقل منخفضةFliegl
ZTS 200 Spezial
مقطورة نقل منخفضة
Fliegl
ZTS 200 Spezial
سعر ثابت دون ضريبة القيمة المضافة
٤٤٬١٠٠ €
سنة الصنع
٢٠١٧
الحالة
مستعمل
الموقع
Triptis 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- مقطورة نقل منخفضة
- المصنّع:
- Fliegl
- الموديل:
- ZTS 200 Spezial
- الرقم المتسلسل:
- 0e87837859aec926e9db10456
- سنة الصنع:
- ٢٠١٧
- الحالة:
- مستعمل
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٤٤٬١٠٠ €
- الموقع:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE

اتصل
تفاصيل فنية
- وزن فارغ:
- ٦٬٢٠٠ كجم
- الوزن الأقصى للحمولة:
- ١١٬٨٠٠ كجم
- الوزن الإجمالي:
- ١٨٬٠٠٠ كجم
- تكوين المحور:
- محورين
- التسجيل الأول:
- ٠٥/٢٠١٨
- مقاس الإطار:
- 235/75 r17,5
تفاصيل العرض
- معرّف القائمة:
- A8265599
- الرقم المرجعي:
- 20437646
- التحديث الأخير:
- في ٢٢.١٠.٢٠٢٤
الوصف
Further information
Chassis: Welded steel construction, double offset with drop deck in front of and behind axle unit, drop deck slanted towards entrance, turntable with strong ball bearing slewing ring, folding rear support, wheel chocks, side collision protection, quarter-shell mudguards
Lashing eyes: above front axle: 2 pairs of ring lashing eyes per 5 tons at the front on the offset drop deck/rear axle: 6 pairs of lashing eyes laterally in the drop deck per 8 tons, 6 pairs of lashing eyes per 5 tons between the side members, pair of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 tons ring lashing eyes embedded in the floor. Ring lashing eyes embedded in the floor
Bodpfx Ahsi Ri N Ujwoww
Drawbar: tested 40 mm drawbar eye
Axles: BPW drum brake axles
Brake system: 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads
Electrical system: 24 volt, multi-chamber lights, amber lighting at the sides, 2 white position lights at the front
2 white/red lane departure lights at the rear, rotating beacon with holder, pair of warning signs illuminated and extendable to 3,000 mm, 2 x 7-pin interchangeable plugs at the front
Floor: Front offset with steel / checker plate covering, storage box recessed in drive-over slope to offset, tramline area and in the middle between the beams with steel / checker plate covering, rear slope with 70 mm softwood floor, deep loading area incl. rear slope 5900 mm
Drive-on ramps: Hook-in strip for aluminum ramps across the entire width. as U-profile across the entire width
Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg,
Storage compartment for ramps between the beams
Approval: contour marking with reflective strips to ECE R 048, white at the sides and red at the rear
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Chassis: Welded steel construction, double offset with drop deck in front of and behind axle unit, drop deck slanted towards entrance, turntable with strong ball bearing slewing ring, folding rear support, wheel chocks, side collision protection, quarter-shell mudguards
Lashing eyes: above front axle: 2 pairs of ring lashing eyes per 5 tons at the front on the offset drop deck/rear axle: 6 pairs of lashing eyes laterally in the drop deck per 8 tons, 6 pairs of lashing eyes per 5 tons between the side members, pair of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 tons ring lashing eyes embedded in the floor. Ring lashing eyes embedded in the floor
Bodpfx Ahsi Ri N Ujwoww
Drawbar: tested 40 mm drawbar eye
Axles: BPW drum brake axles
Brake system: 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads
Electrical system: 24 volt, multi-chamber lights, amber lighting at the sides, 2 white position lights at the front
2 white/red lane departure lights at the rear, rotating beacon with holder, pair of warning signs illuminated and extendable to 3,000 mm, 2 x 7-pin interchangeable plugs at the front
Floor: Front offset with steel / checker plate covering, storage box recessed in drive-over slope to offset, tramline area and in the middle between the beams with steel / checker plate covering, rear slope with 70 mm softwood floor, deep loading area incl. rear slope 5900 mm
Drive-on ramps: Hook-in strip for aluminum ramps across the entire width. as U-profile across the entire width
Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg,
Storage compartment for ramps between the beams
Approval: contour marking with reflective strips to ECE R 048, white at the sides and red at the rear
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2006
تقديم الطلب
الهاتف & فاكس
+49 36482... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ








