شاسيه المبادلة
Fliegl TWP 180 Jumbo Z mit Staplerhalterung

سعر ثابت دون ضريبة القيمة المضافة
‏٢٤٬٧٠٠ €
الحالة
جديد
الموقع
Triptis ألمانيا
شاسيه المبادلة Fliegl TWP 180 Jumbo Z mit Staplerhalterung
شاسيه المبادلة Fliegl TWP 180 Jumbo Z mit Staplerhalterung
شاسيه المبادلة Fliegl TWP 180 Jumbo Z mit Staplerhalterung
more Images
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
عرض الصور
عرض الخريطة

بيانات عن الآلة

وصف الآلة:
شاسيه المبادلة
المصنّع:
Fliegl
الموديل:
TWP 180 Jumbo Z mit Staplerhalterung
الرقم المتسلسل:
207ad28f83705ed0d38a4f174
الحالة:
جديد

السعر والموقع

سعر ثابت دون ضريبة القيمة المضافة
‏٢٤٬٧٠٠ €
موقع البائع:
Oberpöllnitzer Straße 8, 07819 Triptis, ألمانيا ألمانيا
اتصل

تفاصيل فنية

تكوين المحور:
محورين
الوزن الإجمالي:
١٤ كجم
وزن فارغ:
٣ كجم
الوزن الأقصى للحمولة:
١١ كجم
مقاس الإطار:
235/75 r17,5

تفاصيل العرض

معرّف القائمة:
A8265536
الرقم المرجعي:
20437522
التحديث الأخير:
في ٢٢.١٠.٢٠٢٤

الوصف

Further information
Chassis Wechel central axle trailer
Fine-grained steel welded construction
Front stop, longitudinally adjustable and foldable
Pair of removable guide rollers, front and rear
4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 flush with rear (for 7.15 swap bodies not flush with rear, forklift pockets/frame protrude)
Telescopic front support leg
1 pair of front gear support legs, with straight lower section and single-sided operation in FR right
Wheel chocks with holder
Aluminum side bumpers
Steel underride guard
Half-shell mudguards
Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1500 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle)The axles are shifted to the rear by the forklift bracket, observe load distribution when driving without forklift. Customer risk! (For swap body trailers, driving with a forklift is only permitted in conjunction with a swap body) Forklift bracket as AU 203670 adapted to 7.45 m swap bodies
Counterweight at the front between the frames, approx. 300 kg, if necessary, exact check still required
Guedpfx Aji Ri Iajbxoh
Towing device central axle trailer
Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required if ordered)
Lower coupler drawbar
without length adjustment drawbar
Axles + suspension
SAF drum brake axles of the manufacturer's choice
Axle/chassis laser-measured Reduction of tire wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake systemColor-coded line routing for easy servicing.
Spring-applied parking brake
Duomatic connection at the front, with connection line to the engine trolley, in FR-left
Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-right
EBS, electronic brake system with EBS plug at the front, with connecting cable, in FR-left
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve, holding function in each case in lowering / lifting position
Vehicle - driving stability system
Wheels and tires
235/75 R17.5 tires of the manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrical system
24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting on the side, lights mounted in a protected position!
2 white position lights at the front
2 white/red rear lane departure lights
1 x 15-pin plug at the front, with connecting cable, in FR-left
2 x 7-pin sockets in FR left rear for truck-mounted forklift
1 x 15-pin socket in FR left rear for truck-mounted forklift
LED work lights on both sides behind the 2nd axle (switched via reversing light)
Additional LED work light(s) at the rear, switched via reversing light
Approval / plates
Germany
with Dekra approval and certificate (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear
Paint finish
Frame

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.

مورد

اتصل

تقديم الطلب

أرضus 
ألمانيا
النمسا
سويسرا
الولايات المتحدة الأمريكية
المملكة المتحدة
فرنسا
بلجيكا
إسبانيا
المكسيك
إيطاليا
هولندا
بولندا
الاتحاد الروسي
بيلاروس (جمهورية بيلاروس)
أوكرانيا
إستونيا
تركيا
نيوزيلندا
أيرلندا
جمهورية التشيك
الدانمارك
فنلندا
السويد
النرويج
لوكسمبورغ
اليونان
ليتوانيا
لاتفيا
آيسلندا
البرتغال
البرازيل
فنزويلا
الأرجنتين
المجر
سلوفاكيا
رومانيا
مولدوفا
سلوفينيا
صربيا
الجبل الأسود
ألبانيا
كرواتيا
بلغاريا
مقدونيا الشمالية
البوسنة والهرسك
إسرائيل
مصر
المغرب
الهند
إندونيسيا
كوريا الجنوبية
اليابان
تايلاند
ماليزيا
فيتنام
China
تايوان
إيران
بنغلاديش
أفغانستان
ملاحظة: سيتم إرسال طلبك إلى جميع البائعين في فئة الماكينات. وبهذه الطريقة يمكنك الحصول على العديد من العروض.
تعذر إرسال الطلب. يرجى المحاولة مرة أخرى لاحقًا.

الهاتف & فاكس

+49 36482... إعلانات