مسطحة / مشمعFliegl
SDS 390 RoadRunner
مسطحة / مشمع
Fliegl
SDS 390 RoadRunner
EXW سعر ثابت دون ضريبة القيمة المضافة
٩٬٩٠٠ €
سنة الصنع
٢٠١٥
الحالة
مستعمل
الموقع
Triptis 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- مسطحة / مشمع
- المصنّع:
- Fliegl
- الموديل:
- SDS 390 RoadRunner
- الرقم المتسلسل:
- WFDFLT33902017848
- سنة الصنع:
- ٢٠١٥
- الحالة:
- مستعمل
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
EXW سعر ثابت دون ضريبة القيمة المضافة
٩٬٩٠٠ €
- الموقع:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

اتصل
تفاصيل فنية
- وزن فارغ:
- ٦٬٥٣٧ كجم
- الوزن الأقصى للحمولة:
- ٢٨٬٤٦٣ كجم
- الوزن الإجمالي:
- ٣٥٬٠٠٠ كجم
- تكوين المحور:
- 3 محاور
- التسجيل الأول:
- ١٠/٢٠١٥
- طول مساحة التحميل:
- ١٣٬٦٥٠ مم
- عرض مساحة التحميل:
- ٢٬٤٨٠ مم
- ارتفاع مساحة التحميل:
- ٢٬٧٩٠ مم
- مقاس الإطار:
- 385/65 r22.5
- لون:
- فضي
تفاصيل العرض
- معرّف القائمة:
- A9058631
- الرقم المرجعي:
- 37357
- التحديث الأخير:
- في ٠٦.٠٥.٢٠٢٥
الوصف
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Kjdpfx Ajkyrmijbbonf
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Kjdpfx Ajkyrmijbbonf
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
تقديم الطلب
الهاتف & فاكس
+49 36482... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ










