مقطورة نصف منخفضةFliegl
SDS 390, Nachlaufgelenkt, 3x VORHANDEN!
مقطورة نصف منخفضة
Fliegl
SDS 390, Nachlaufgelenkt, 3x VORHANDEN!
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٢٤٬٩٠٠ €
الحالة
مستعمل
الموقع
Bovenden 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٢٤٬٩٠٠ €
- موقع البائع:
- Alte Bundesstraße 48, 37120 Bovenden, ألمانيا

اتصل
تفاصيل فنية
- وزن فارغ:
- ٦٬٩٩٠ كجم
- الوزن الأقصى للحمولة:
- ٢٨٬٠١٠ كجم
- الوزن الإجمالي:
- ٣٥٬٠٠٠ كجم
- تكوين المحور:
- 3 محاور
- التسجيل الأول:
- ٠١/٢٠٢١
- الفحص القادم (TÜV):
- ٠٩/٢٠٢٦
- طول مساحة التحميل:
- ١٠٬٠٠٠ مم
- عرض مساحة التحميل:
- ٢٬٥٠٠ مم
- ارتفاع مساحة التحميل:
- ١ مم
- تعليق:
- هواء
- مقاس الإطار:
- 235/75R17.5
- لون:
- أبيض
- عدد الكيلومترات المقطوعة:
- ١٬٠٠١ كم
- نوع التروس:
- آخر
- كابينة السائق:
- آخر
- معدات:
- نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف الإعلان:
- A20750407
- رقم المرجع:
- 89057
- تحديث:
- آخر مرة في ١٨.٠٣.٢٠٢٦
وصف
Vehicle location: Bovenden. 3-axle, air-suspended, last axle steered, ABS (anti-lock braking system), lashing eyes, underride protection, supports, storage box.
Body: 3 units available!
Overall length approx.: 13,800 mm
Overall width max.: 2,550 mm
Overall height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Low bed length approx.: 9,600 mm
Loaded loading height in the low bed approx.: 900 mm
Internal width approx.: 2,480 mm
Saddle height approx.: 1,150 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm
Fine-grained steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, slightly inclined outer frame with "Load-Lock profile" for securing lashing straps, 8 pairs of additional lashing eyes integrated in the outer frame each with a load capacity of 5t, 1x removable leveling block on low-bed platform (3-piece), timber crossbeam on top, at least 200 mm wide, for height compensation; gooseneck can be inserted in 3 positions with a parking position at the cranked section; 4 pairs of stake pockets 83 x 83 mm recessed in the floor for inserting the leveling block; open compartment for plug-in stanchions beneath the loading area; 13 pairs of stake pockets integrated in the outer frame, 70 x 40 mm internal dimension (3 pairs on the gooseneck, 10 pairs on the low bed); 3 rows of stake pockets recessed in the floor, each with 7 pockets, 70 x 40 mm internal dimension; 26 plug-in stanchions, dimensions W=80 / D=50 / L=1,200 mm, hot-dip galvanized; hardwood floor approx. 30 mm thick, laid lengthwise, with omega profiles for high point load capacity in the wheel arch area; steel/chequer plate floor. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!
Ijdpfx Aex Hkcishvshw
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Body: 3 units available!
Overall length approx.: 13,800 mm
Overall width max.: 2,550 mm
Overall height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Low bed length approx.: 9,600 mm
Loaded loading height in the low bed approx.: 900 mm
Internal width approx.: 2,480 mm
Saddle height approx.: 1,150 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm
Fine-grained steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, slightly inclined outer frame with "Load-Lock profile" for securing lashing straps, 8 pairs of additional lashing eyes integrated in the outer frame each with a load capacity of 5t, 1x removable leveling block on low-bed platform (3-piece), timber crossbeam on top, at least 200 mm wide, for height compensation; gooseneck can be inserted in 3 positions with a parking position at the cranked section; 4 pairs of stake pockets 83 x 83 mm recessed in the floor for inserting the leveling block; open compartment for plug-in stanchions beneath the loading area; 13 pairs of stake pockets integrated in the outer frame, 70 x 40 mm internal dimension (3 pairs on the gooseneck, 10 pairs on the low bed); 3 rows of stake pockets recessed in the floor, each with 7 pockets, 70 x 40 mm internal dimension; 26 plug-in stanchions, dimensions W=80 / D=50 / L=1,200 mm, hot-dip galvanized; hardwood floor approx. 30 mm thick, laid lengthwise, with omega profiles for high point load capacity in the wheel arch area; steel/chequer plate floor. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!
Ijdpfx Aex Hkcishvshw
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2002
٢٬٣٠٣ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 551 8... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


























