آلة طلاء بالغراء مع ذوبان للأكياسFE-MA-TECH
advanced PUR 2 kg light Smart
آلة طلاء بالغراء مع ذوبان للأكياس
FE-MA-TECH
advanced PUR 2 kg light Smart
سعر ثابت دون ضريبة القيمة المضافة
١١٬٥٠٠ €
سنة الصنع
٢٠٢٢
الحالة
مستعمل
الموقع
Viersen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- آلة طلاء بالغراء مع ذوبان للأكياس
- المصنّع:
- FE-MA-TECH
- الموديل:
- advanced PUR 2 kg light Smart
- سنة الصنع:
- ٢٠٢٢
- الحالة:
- جيد جدًا (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
١١٬٥٠٠ €
- الموقع:
- 41748 Viersen-Ummer, Deutschland
اتصل
تفاصيل العرض
- معرّف القائمة:
- A19756800
- الرقم المرجعي:
- 8404
- التحديث الأخير:
- في ٠٨.٠٩.٢٠٢٥
الوصف
Fe-Ma-Tech Bag Melter Glue Application Unit:
- Type: advanced PUR 2 kg light eSmart
- Year of manufacture: 2022
- TOP condition
- Weight: approx. 70 kg
- Dimensions: 550 x 430 x 970 mm
- Type of glue pump: Gear pump
- Pump nominal speed: 93 rpm
- Base tank size (reservoir): approx. 1 liter
- Melting capacity: up to 2 kg/h
- Temperature sensor: PT100 device and external heating / optional Ni. 120
- Control accuracy: +/- 1°C
Crodpfow I S Eajx Ahxeh
The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption.
Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg.
Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts.
Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity).
The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed.
A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive.
From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.).
The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly.
Shipping via freight forwarding is available for an additional €190.40
#8404
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
- Type: advanced PUR 2 kg light eSmart
- Year of manufacture: 2022
- TOP condition
- Weight: approx. 70 kg
- Dimensions: 550 x 430 x 970 mm
- Type of glue pump: Gear pump
- Pump nominal speed: 93 rpm
- Base tank size (reservoir): approx. 1 liter
- Melting capacity: up to 2 kg/h
- Temperature sensor: PT100 device and external heating / optional Ni. 120
- Control accuracy: +/- 1°C
Crodpfow I S Eajx Ahxeh
The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption.
Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg.
Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts.
Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity).
The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed.
A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive.
From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.).
The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly.
Shipping via freight forwarding is available for an additional €190.40
#8404
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
تقديم الطلب
الهاتف & فاكس
+49 2162 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ