مقطورة نصف منخفضة

FAYMONVILLE Multimax Plus Satteltieflader Hebebett

You will find our entire inventory of immediately and short-term available vehicles on our website. For a complete list of equipment, please enquire.

SPECIFICATION:

GOOSENECK:
* Gooseneck in SNT design for improved platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° taper
* For tractor units: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX
* On the gooseneck and rear taper: open grating with 5 mm steel reinforcement
* 2-inch kingpin
* Guide plate from gooseneck for the fifth wheel, approx. 500 mm wide
* Round NATO connector on the front panel (Maeler & Kaege VG 96 917)
* On the gooseneck: 1 pair of removable ALU side panels, approx. 400 mm high, anodized finish
* 1 LED work light each, left and right, mounted at the top of the front wall, wired to the coupling panel for the tractor unit

CARGO AREA:
* Platform length approx. 9,600 mm, with rear slope approx. 900 mm x 6°
* Hydraulic lift/lowering section after gooseneck, length approx. 3,000 mm, rated for up to approx. 9,000 kg
* Continuous open grating on lift bed and platform with approx. 5 mm steel underlay for reinforced point loading
Hfodpfx Aasy Auhhohef

TYRES:
235/75 R17.5, 3PMSF, twin tyres. Make at our discretion
* TPMS tyre pressure monitoring system compliant with ECE R 141

AXLES:
* BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable
* 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually
* 1st axle with starting aid
* Technical axle load: 12,000 kg per axle
* Air suspension with raise/lower valve

HYDRAULIC LOADING RAMPS:
* 1 pair of AXS steel ramps, two-part, open grating surface, length approx. 4,920 mm, width approx. 900 mm
* Hydraulically folding ramp tips
* Each ramp hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward
* Strobe lights at ramp tips, switch positioned next to ramp controls
* Ramp transport lock in driving position with quick-release
* Painted non-slip coating on outer frame and ramp tip
* Mechanical drop-leg side supports integrated in ramps, to assist with dock alignment
* Ramp control valves on right side of vehicle

BRAKE SYSTEM:
WABCO EBS-E braking system, compliant with EU regulations

SURFACE TREATMENT:
* Entire chassis HRM metallized with ZINACOR 850 (85% zinc / 15% aluminium) for superior corrosion protection

PAINTWORK:
* Trailer body Carmine Red (RAL 3002)
* Rims Silver Grey
* Side walls Aluminium natural finish
* Hub caps as per axle manufacturer
* License plate holder Pure White (RAL 9010)

EQUIPMENT:
* Front wall made of steel, removable, approx. 1,600 mm high, incl. coupling panel for supply lines to tractor unit, mounted approx. 1,000 mm from the lower edge of the outer frame
* Lashing chain anchor points inside left and right on front wall incl. aluminium trays below left and right for stowing chains or straps
* Behind the front wall: approx. 12 mm thick DELIGNIT panel, bolted
* Additional 2 pairs of bolted lashing rings (LC 5,000 daN)
* Electric cable winch, approx. 5,400 kg pulling power, with remote control. Steel cable approx. 24 m long, 9.5 mm diameter, incl. cable pressure roller
* Deflection pulley for the winch, with shackle and bolted lashing point

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.