مقطورة نصف منخفضة

FAYMONVILLE MAX Trailer MAX510 Tiefbett 3x12 t PA

You can find our entire stock of vehicles, including those available immediately and at short notice, on our website.

Extract from the specifications. Full equipment list available upon request.

Gooseneck:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long
* Gooseneck hydraulically liftable/lowerable and detachable
* For tractors: 6 x 4 or 8 x 4

Low bed:
* Low bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long
* Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking
* Supply lines are protected within the extendable beams and automatically adapt to the respective low bed length
* 7 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN)
Hjdpjxbmprsfx Abxofn
* 6 pairs of threaded blocks on the inner beams for mounting bolted RUD rings

Rear chassis:
* Rear chassis with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at the rear
* 2 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN)
* 1 pair of lashing rings, lying flat in the recess (approx. LC 10,000 daN)
* 2 pairs of lashing rings, lying flat in the recess (approx. LC 16,000 daN)
* 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm in the outer frame

PENDLE AXLE:
* PENDLE AXLE, all axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation cylinder with automatic reset function
* Hydraulic cylinders with shut-off valves and locking pins to secure in the raised position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* Axle tool

Tyres:
* Tyres 245/70 R 17.5 3PMSF – brand at our discretion
* Load index (146/146F)

Brake system:
* Wabco brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit

Paintwork:
* Entire steel structure automatically blast-cleaned after welding using a shot blasting unit
* Second blast treatment with corundum for optimum coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee the best corrosion protection
* Final paint finish with 2 coats of 2K topcoat, single-color in RAL 3002 Carmine Red according to RAL system 841GL

Including the following accessories:
* Preparation for installation of bolted container placements for 1x 20' or 1x 40' container on the external beams
* Without container locks
* 3.5 inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Remote-controlled steering from the front and rear via cable remote with push buttons, with axle tracking control (without installation on the tractor unit)
* Electro-hydraulic unit
* On the gooseneck, removable aluminum side and rear walls, approx. 2,000 x 400 mm (L x H)
* The rear galvanized plug-in stakes are removable (superstructure length approx. 2,120 mm)
* Hydraulic connections from the gooseneck to the low bed via multi-coupling instead of screw couplings (no guarantee on seals)
* Separate air connection with air gun on gooseneck
* 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area
* One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
* 2 pairs of boltable lashing rings M20 (LC 5,000 daN)
* 2 pairs of boltable RUD rings VLBG-4 M24 (LC 8,000 daN)
* Folding extensions, approx. 230 mm per side, widening planks made of hardwood. The maximum load is distributed on an area of appr

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.