مقطورة نصف منخفضة

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Hebebett

You can find our complete range of vehicles, including those available immediately or at short notice, on our website.

Excerpt from the equipment list. Full equipment details available on request.

Gooseneck:
* Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick

Loading area:
* Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8°
* 6 pairs of folding outward lashing rings (LC 5,000 daN)
* 2 pairs of folding outward lashing rings (LC 10,000 daN)
* 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN)
* Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN)
* Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate

Two-piece steel ramps:
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable
* Maximum load per pair: approx. 40,000 kg

Landing gear:
* JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)

Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock via reverse gear and manual activation
* Air suspension with lift and lower valve

Brake system:
* WABCO brake system according to EU regulations with EBS-E (2S2M)

Tyres:
235/75 R 17.5 3PMSF – Manufacturer of our choice

TPMS:
* TPMS tire pressure monitoring system in accordance with ECE R 141

Paintwork:
* HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection
* Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL
* Rims in silver grey

Including accessories:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Non-slip sand paint on the checker plates above kingpin and loading area
* Electro-hydraulic unit at the rear under the loading area
* On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm)
* An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley
* Bolted 5 t ring for cable winch deflection on the neck without deflection pulley
* One galvanized toolbox integrated in the beveled gooseneck with opening for a winch
* Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area
Ksdpfjyhkqzox Ahvoww
* Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition
* 7 pairs comple...

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.