مقطورة نصف منخفضة

FAYMONVILLE MAX Trailer MAX 810 Semi-Tieflader 2+6 PA-X

You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website.

Hfsdpfx Acezbfuhenjh
Excerpt from the equipment. Complete equipment available upon request.

Gooseneck:
* MAX810-H neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400}
* Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm
* Truck hydraulic connection with flow control (20 l/min),
* incl. gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 l with MAX trailer couplings; otherwise, the customer must supply the couplings.
* For SZM: 6 x 4 or 8 x 4

Loading platform
MAX810-6-A-11.00-17.5-1.50-2.75-PA-X
* 6-axle telescopic loading platform with bolt-tab coupling at the front and a slope of approx. 500 mm x 8° at the rear.
* Length: approx. 11,000 mm
* Technically extendable by: approx. 7,700 mm
* Axle spacing: approx. 1,500 mm
* Hydraulic coupling bolt. PENDULUM AXLE 2-AXLE FRONT AXLE
* All axles hydro-mechanically steered.
* MAX810 chassis-PA-X-F-2-17.5-1.50-2.75 bolt-tab coupling at the front and rear.
* Length: approx. 2,970 mm Chassis width: approx. 2,750 mm
* BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2
* Extendable widening elements by approx. 230 mm per side for a 2-axle chassis. (± 27 kg)

PENDULUM AXLE 6-AXLE LOADING PLATFORM
* All axles hydro-mechanically steered.
* Hose burst valve on the axle balancing cylinder with automatic RESET function.
* Hydraulic cylinder with shut-off valves and quick-release coupling to secure in the raised position.
* Technical axle load: 13,740 kg each (30 km/h)
* Hydraulic axle balancing.

TIRES
* 24 x manufacturer of our choice (M+S) 245/70 R17.5
* Load index 143/141L (146/146F)
* TPMS: TPMS tire pressure monitoring system according to ECE R 141.

Final coating of the axles
* with 2 coats of 2-component paint, solid color in DB7350 Novagrau.
* PAINTING Complete steel construction is automatically blasted with a shot-blasting system after welding.
* Second blasting process with corundum for optimal adhesion of the coating system.
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection.
* PAINTING Semi-trailer in carmine red (RAL 3002)

Including the following accessories
* Gantry with winch for spare tire on the front of the gooseneck.
* 3.5-inch Kingpin
* Steel front panel approx. 400 mm high.
* Aluminum side and rear panels that can be attached to the gooseneck, approx. 400 mm high, in anodized design.
* Control levers on the gooseneck protected by a folding cover.
* Lighting for the controls on the gooseneck with on/off switch.
* A 7-pole socket on the left and right rear of the gooseneck for the warning panel.
* Load gauge on the gooseneck for axle load determination on the front and rear chassis.
* BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2.
* Hydraulic connections from the gooseneck to the lowbed with screw couplings.
* Access to the gooseneck.
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 HP) at 3000 rpm Emission level: EU Stage V Max. Hydraulic pressure: 280 bar Max. Flow rate: 21 l/min Mounted on the gooseneck.
* Hydraulic oil tank 100 L Frame hot-dip galvanized (± 480 kg)
* Hydraulic connecting lines between the power pack and the connector plate on the gooseneck.

* Radio remote control:
* Operation of the power pack, start/s

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.