روبوتات الرسم، الرسامين، الروبوتات الصناعيةFANUC
P-250iA/15
روبوتات الرسم، الرسامين، الروبوتات الصناعية
FANUC
P-250iA/15
سعر ثابت دون ضريبة القيمة المضافة
٢٥٬٠٠٠ €
سنة الصنع
٢٠٠٧
الحالة
مستعمل
الموقع
Krostitz 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- المصنّع:
- FANUC
- الموديل:
- P-250iA/15
- الرقم المتسلسل:
- 82351
- سنة الصنع:
- ٢٠٠٧
- الحالة:
- شبه جديد (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٩٢ h
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٢٥٬٠٠٠ €
- الموقع:
- Hilchenbacher Str. 1, 04509 Krostitz, DE
اتصل
تفاصيل فنية
- الوزن الإجمالي:
- ٥٢٠ كجم
- سعة التحميل:
- ١٥ كجم
- مدى الذراع:
- ٢٬٨٠٠ مم
- نطاق التدوير:
- ٣٢٠ °
- مصنع وحدات التحكم:
- FANUC
- طراز وحدة التحكم:
- RJ3iC
- مصنع وحدات تعليمية تحكم عن بعد:
- FANUC
- عرض خزانة التحكم:
- ٨٠٠ مم
- ارتفاع لوحة التحكم:
- ١٬٣٦٠ مم
- جهد الدخل:
- ٤٠٠ V
- تيار الدخل:
- ٢٠ A
- نوع تيار الإدخال:
- تكييف الهواء
- دقة التكرار:
- ٢ مم
تفاصيل العرض
- معرّف القائمة:
- A16279249
- التحديث الأخير:
- في ١١.٠٦.٢٠٢٤
الوصف
This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem.
The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special.
We give a 1-year commissioning guarantee.
Godpfjtu H Avsx Abxjuh
We can help with transportation and installation.
It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation.
At the moment it is configured as right-armed and right-handed.
However, this can easily be changed without mechanical conversion.
The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest.
We would bring the device to us from Frankfurt.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special.
We give a 1-year commissioning guarantee.
Godpfjtu H Avsx Abxjuh
We can help with transportation and installation.
It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation.
At the moment it is configured as right-armed and right-handed.
However, this can easily be changed without mechanical conversion.
The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest.
We would bring the device to us from Frankfurt.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2020
تقديم الطلب
الهاتف & فاكس
+49 34295... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير

٣٬١٤٩ km
روبوتات الرسم، الروبوتات الصناعية
FANUCP-250iA/15
FANUCP-250iA/15
إعلان صغير

٣٬١٤٩ km
روبوتات الرسم، الرسامين، الروبوتات الصناعية
FANUCP-250iA/15
FANUCP-250iA/15
إعلان صغير

٣٬١٤٩ km
روبوت فانوك للمعصم P-250iA 15
FANUCP-250iA/15
FANUCP-250iA/15
تم حذف إعلانك بنجاح
حدث خطأ