مقطورة مع منصة عمل

ES-GE Tandem-Anhänger Bordwände, CV, Rungen

You can find our complete range of vehicles, including those available immediately and at short notice, on our website.

Excerpt from the specification. Full specification available upon request.

Gjdpfxoxc Axxe Abxokc
Chassis
* Steel welded construction consisting of welded longitudinal beams and punched Z-crossmembers
* Close-spaced crossmembers for high floor load capacity
* Ramp storage between the longitudinal beams behind the axle assembly
* Two insertion pockets beneath the loading floor, each for one loading ramp, with a locking plate integrated into the rear end frame

Front support
* Support winch with single-side operation

Drawbar equipment
* Height-adjustable rigid drawbar with bolted towing eye, approx. 40 mm according to DIN
* Height adjustment of approx. +/- 150 mm

Rear support
* Two adjustable drop legs

Axle assembly
* 2 x 7 t air suspension axle assemblies, brand SAF
* Drum brake approx. 300 x 150 mm
* Wheel connection: 10-hole hub-centered for single tires
* Total air suspension travel approx. 180 mm, with lift approx. 150 mm and lower approx. 30 mm
* Control via hand lever with detent function

Tires
* 4 pieces, 285/70 R 19.5 – manufacturer at our discretion
* On steel rims 8.25 x 19.5, manufacturer at our discretion

Splash protection
* PVC splash guards in front of and behind the axles
* In accordance with EC, with rear mud flap

Load securing
* On the outer frame, lashing rail for ratchet straps approximately every 200 mm, tie-down force approx. 2.5 t
* 6 pairs of folding lashing rings evenly distributed, tie-down force approx. 8,000 daN
* Stake pockets for 80/50 plug-in stakes
* 3 pairs of stake pockets evenly distributed in the outer frame
* 4 rows of stake pockets across the loading platform, evenly distributed

Braking system
* Pneumatic braking system according to EC with EBS and one coupling head each (red/yellow) at the connection plate on the drawbar
* Connection to towing vehicle via one double helix with 1 coupling head red/yellow and 1 Duomatic coupling
* Spring-actuated parking brake acting on one axle

Floor
* Approx. 28 mm Z-hardwood floor recessed into the outer frame
* Wheel arch areas with sheet metal covers
* Floor load capacity suitable for forklift operation up to approx. 5 t

Container locks:
* Container locks for 1 x 20 ft. as per ISO 1496, EN 284, or EN 452-1
* Additional container locks for 1 x 10 ft. at the front according to ISO 1496, EN 284, or EN 452

Lighting
* Lighting system according to EC, 24 Volt
* Multi-chamber rear lights, license plate lights, side marker lights, and lane position lights at the rear
* Connector plate on the drawbar including wiring harness with 15-pin and 2 x 7-pin sockets

Accessories included
* 1 removable rotating warning beacon at the rear with permanent light registration
* Additional: with switch, 2 LED reversing lights on the rear lamp carrier, activated via reverse gear
* Side and rear welded forklift approach protection
* 1 x stainless steel toolbox each left and right behind the axles
* 6 x 250 mm side boards (3 per side) and front/rear boards made from anodized aluminum hollow profiles, approx. 600 mm high
* Side boards can be foldable and removable, removable Kinnegrip stakes (internal width approx. 2,480 mm)
* Side board/stake magazine at the front bulkhead
* 1 additional retaining plate including parking sockets for air/electrics/EBS

Paintwork
* Chassis hot-dip galvanized
* Side boards RAL 9010 Pure White
* Hubs KTL black
* Rear underrun protection RAL 9010 White
*

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.