شبه مقطورة بمنصة عملES-GE
3-Achs Sattelanhänger -Bordwände
شبه مقطورة بمنصة عمل
ES-GE
3-Achs Sattelanhänger -Bordwände
سعر ثابت دون ضريبة القيمة المضافة
٣٩٬٧٥٠ €
الحالة
مستعمل
الموقع
Essen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٣٩٬٧٥٠ €
- موقع البائع:
- Heegstraße 6-8, 45356 Essen, ألمانيا
اتصل
تفاصيل فنية
- الوزن الإجمالي:
- ٣٩٬٠٠٠ كجم
- الوزن الأقصى للحمولة:
- ٣٢٬٣٤٠ كجم
- تكوين المحور:
- 3 محاور
- التسجيل الأول:
- ٠٧/٢٠٢٤
- الفحص القادم (TÜV):
- ٠٧/٢٠٢٥
- العرض الكلي:
- ٢٬٥٥٠ مم
- معدات:
- نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف القائمة:
- A18909156
- الرقم المرجعي:
- 33398
- التحديث الأخير:
- في ٢٩.٠٨.٢٠٢٥
الوصف
You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available upon request.
Chassis
* Welded construction made from high-grade steel profiles with punched-through crossmembers, designed for high point loads
Coupling Device
* 2-inch kingpin
Underrun Protection
* Bolted version, compliant with EU regulations
Side Guard Protection
* Compliant with EU regulations
Landing Legs
* 2 x 12 t landing legs with compensating foot and single-sided operation (right side in direction of travel)
Axles
* 3 x 9 t air suspension axle assembly
* Disc brakes
* Manufacturer: Gigant
Brake System
* Dual-circuit compressed air brake system compliant with EU regulations with EBS and RSS
* Automatic load-dependent control
* Spring-actuated cylinders for parking brake
* Reversed polarity-safe coupling heads, permanently mounted on the front crossmember (no connecting line to tractor unit)
* Manufacturer: Wabco
Tyres
* 6 units, 385/65 R22.5 160J on steel rims 11.75 x 22.5 ET 120
Mudguards
* Compliant with EU regulations
* PVC mudguards in front of and behind the axle assembly
Spare Wheel Carrier
* 1 double basket incl. mounting material for one spare wheel with ET 120
Load Securing
* 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t
* 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t
Ijdpfjwbb Ufox Abxotn
* External frame with drilled holes every approx. 500 mm for tension belts
Front Wall
* Reinforced steel construction, fixed
* Inside lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high)
Floor
* Approx. 28 mm Z-hardwood floor recessed into the external frame
Lighting System
* Compliant with EU regulations, 24 Volt, with multi-chamber lights
* LED side marker lights
* LED position lights front (white)
* LED outline lights at rear
* Number plate lights
* 1 x 15-pin and 2 x 7-pin plug connections on the front crossmember
Paintwork
* Chassis and front wall blast-cleaned, primed, and painted in a single color
* Chassis: RAL 3002 carmine red
* SSV: anodized aluminum
* Underrun protection: white (RAL 9010)
* Add-on parts: galvanized/KTL black
* Rims: silver
Additional Equipment
* First axle liftable, with fully automatic, load-dependent lifting control
* 10 pairs of stake pockets in the external frame, evenly distributed
* 4 rows of stake pockets across the load floor
* 20 pieces of stakes, galvanized tube 80/50, total length approx. 1,000 mm
* Inside the front wall, a magazine for 20 plug-in stakes
* 5 x 25 side and rear boards made of anodized aluminum hollow profiles, approx. 600 mm high, folding and removable
* Removable Kinnegrip stakes
* Sliding rails under the chassis left and right for side boards and stakes
* Work light on lamp bracket (activated via reverse gear)
* 2 PVC toolboxes, approx. 660 x 400 x 500 mm
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Excerpt from the equipment list. Full equipment details available upon request.
Chassis
* Welded construction made from high-grade steel profiles with punched-through crossmembers, designed for high point loads
Coupling Device
* 2-inch kingpin
Underrun Protection
* Bolted version, compliant with EU regulations
Side Guard Protection
* Compliant with EU regulations
Landing Legs
* 2 x 12 t landing legs with compensating foot and single-sided operation (right side in direction of travel)
Axles
* 3 x 9 t air suspension axle assembly
* Disc brakes
* Manufacturer: Gigant
Brake System
* Dual-circuit compressed air brake system compliant with EU regulations with EBS and RSS
* Automatic load-dependent control
* Spring-actuated cylinders for parking brake
* Reversed polarity-safe coupling heads, permanently mounted on the front crossmember (no connecting line to tractor unit)
* Manufacturer: Wabco
Tyres
* 6 units, 385/65 R22.5 160J on steel rims 11.75 x 22.5 ET 120
Mudguards
* Compliant with EU regulations
* PVC mudguards in front of and behind the axle assembly
Spare Wheel Carrier
* 1 double basket incl. mounting material for one spare wheel with ET 120
Load Securing
* 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t
* 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t
Ijdpfjwbb Ufox Abxotn
* External frame with drilled holes every approx. 500 mm for tension belts
Front Wall
* Reinforced steel construction, fixed
* Inside lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high)
Floor
* Approx. 28 mm Z-hardwood floor recessed into the external frame
Lighting System
* Compliant with EU regulations, 24 Volt, with multi-chamber lights
* LED side marker lights
* LED position lights front (white)
* LED outline lights at rear
* Number plate lights
* 1 x 15-pin and 2 x 7-pin plug connections on the front crossmember
Paintwork
* Chassis and front wall blast-cleaned, primed, and painted in a single color
* Chassis: RAL 3002 carmine red
* SSV: anodized aluminum
* Underrun protection: white (RAL 9010)
* Add-on parts: galvanized/KTL black
* Rims: silver
Additional Equipment
* First axle liftable, with fully automatic, load-dependent lifting control
* 10 pairs of stake pockets in the external frame, evenly distributed
* 4 rows of stake pockets across the load floor
* 20 pieces of stakes, galvanized tube 80/50, total length approx. 1,000 mm
* Inside the front wall, a magazine for 20 plug-in stakes
* 5 x 25 side and rear boards made of anodized aluminum hollow profiles, approx. 600 mm high, folding and removable
* Removable Kinnegrip stakes
* Sliding rails under the chassis left and right for side boards and stakes
* Work light on lamp bracket (activated via reverse gear)
* 2 PVC toolboxes, approx. 660 x 400 x 500 mm
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2003
تقديم الطلب
الهاتف & فاكس
+49 201 8... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير

٣٬٣٩٨ km
شبه مقطورة بمنصة عمل
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
إعلان صغير

٣٬٣٩٨ km
شبه مقطورة بمنصة عمل
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
تم حذف إعلانك بنجاح
حدث خطأ