مكبس إكسنتر ذو عمود واحد مع تغذية بالكماشة، مكبس إكسنتر للثقب، ماكينة تثقيب أوتوماتيكيةEBU
75 SKU
مكبس إكسنتر ذو عمود واحد مع تغذية بالكماشة، مكبس إكسنتر للثقب، ماكينة تثقيب أوتوماتيكية
EBU
75 SKU
سعر ثابت دون ضريبة القيمة المضافة
٥٬٨٠٠ €
الحالة
مستعمل
الموقع
Hessisch Lichtenau 

عرض الصور
عرض الخريطة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٥٬٨٠٠ €
- الموقع:
- 37235 Hessisch Lichtenau

اتصل
تفاصيل العرض
- معرّف القائمة:
- A3847471
- الرقم المرجعي:
- 56616
- التحديث الأخير:
- في ٢٩.٠٦.٢٠٢٥
الوصف
Single-column eccentric press EBU Type 75 SKU
Machine no. No. P 4598462 Year of construction 1962
Compressive force 75 ton.
throat depth 300 mm
Table surface 800 x 620 mm
waste hole 325 x 225 mm
Nsdpfxedzqltj Ag Isli
Plunger surface 470 x 180 mm
Clamping pin bore Ø 40 mm
Table height above floor 845 mm
Stroke adjustment 16 - 140 mm
Plunger adjustment 80 mm
Installation height max. approx. 420 mm
Stroke rate 60 + 105 strokes/min.
Motor power 4 kW
Mains connection 380 Volt, 50 Hz.
- Pneumatic clutch/brake combination EBU
- Overload protection with breaker plate in ram
- UNIDOR tool monitoring system, type APS MINI
- mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350
- strip width: 200 mm, feed length: max. 350 mm
- Strip thickness: max. 3 mm or approx. 200 x 1.5 mm
- 2 speeds due to 2 V-belt stages on the wheel transmission
- Two-handed operation
- Simple work area shielding for swinging open
- Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level
- Control cabinet and control panel for tool monitoring adjacent
- Automatic central lubrication
- 4 machine feet
Space requirement L x W x H 2600 x 2300 x 2450 mm
Weight approx. 5.5 tons
good condition
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Machine no. No. P 4598462 Year of construction 1962
Compressive force 75 ton.
throat depth 300 mm
Table surface 800 x 620 mm
waste hole 325 x 225 mm
Nsdpfxedzqltj Ag Isli
Plunger surface 470 x 180 mm
Clamping pin bore Ø 40 mm
Table height above floor 845 mm
Stroke adjustment 16 - 140 mm
Plunger adjustment 80 mm
Installation height max. approx. 420 mm
Stroke rate 60 + 105 strokes/min.
Motor power 4 kW
Mains connection 380 Volt, 50 Hz.
- Pneumatic clutch/brake combination EBU
- Overload protection with breaker plate in ram
- UNIDOR tool monitoring system, type APS MINI
- mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350
- strip width: 200 mm, feed length: max. 350 mm
- Strip thickness: max. 3 mm or approx. 200 x 1.5 mm
- 2 speeds due to 2 V-belt stages on the wheel transmission
- Two-handed operation
- Simple work area shielding for swinging open
- Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level
- Control cabinet and control panel for tool monitoring adjacent
- Automatic central lubrication
- 4 machine feet
Space requirement L x W x H 2600 x 2300 x 2450 mm
Weight approx. 5.5 tons
good condition
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
تقديم الطلب
الهاتف & فاكس
+49 5602 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ

























