اضغط على عمود مزدوجDurendus
Vulkanisierpresse
اضغط على عمود مزدوج
Durendus
Vulkanisierpresse
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٢٣٬٥٠٠ €
سنة الصنع
٢٠٢٦
الحالة
جديد
الموقع
Gelsenkirchen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- اضغط على عمود مزدوج
- الشركة المصنعة:
- Durendus
- طراز:
- Vulkanisierpresse
- سنة الصنع:
- ٢٠٢٦
- الحالة:
- جديد
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٢٣٬٥٠٠ €
- الموقع:
- Hertener Strasse 108, 45892 Gelsenkirchen, Deutschland

اتصل
تفاصيل فنية
- قوة الضغط:
- ٣٠ t
تفاصيل العرض
- معرّف الإعلان:
- A21814773
- رقم المرجع:
- 30T 700 × 500
- تحديث:
- آخر مرة في ٢٩.٠٤.٢٠٢٦
وصف
DURENDUS 30 T Heated Press – Double-column Press – 700 × 500 mm Heated Plates, Sliding Table
The machine shown here was built to a customer’s order and has already been delivered. We can manufacture this machine for you at short notice – including consideration of individual options as required. This is a hydraulic heated press with electrically heated platens and a manual sliding table for pressing, laminating, and forming processes under elevated temperature conditions.
Base price: €23,500 net
Options (on request):
The listed options are based on completed customer projects and enable targeted adaptation of the machine for the respective application. The base machine is a functional standard version – in practice, it is usually supplemented with additional equipment and configured specifically for the project.
====
Technical Data & Information:
==== General Information
* Design: Double-column press
* Pressing force: 30 t (adjustable)
* Total weight: approx. 3,200 kg
* Dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm
==== Working Area
* Table size: 700 × 500 mm
* Heated plates: 700 × 500 × 65 mm
* Installation height: max. 800 mm
* Table traverse: 500 mm (manual)
==== Table & Ram
* Ram stroke: 600 mm
* Cylinder diameter: Ø 130 mm
* Piston rod: Ø 80 mm
* 8-fold guide for parallelism
==== Speeds
* Working speed: 9 mm/s
* Return speed: 25 mm/s
==== Hydraulics & Drive
* Working pressure: max. 240 bar
* Pump capacity: 12 l/min
* Motor power: 3 kW
* Hydraulic tank: 80 l
* Pressure accuracy: ±5 bar
* Hydraulic system with air cooling
==== Controls & Operation
* SIEMENS S7-1200 controller with 7" touch panel
* Programmable parameters (stroke, pressure, time, cycles)
* Two-hand operation
* Electrical connection: 400 V / 50 Hz
* Total connected load: approx. 25 kW (including heating)
==== Equipment
* Electrically heated press plates up to 200 °C
* Temperature monitoring with sensors
* Passive pressure holding function up to 60 minutes
* Hydraulic and electronic overload protection
* Safety limit switches
* CE certification
* Two-layer coating according to RAL standard
Hodpfx Aisy H Dtzeqjl
=====
Hot pressing, laminating, plastics processing, rubber and composite material processing, molding
Heated press, hydraulic press, double-column press, thermal press, laminating press, industrial press
Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully conform to the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength is special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic components of our presses, we primarily use parts from leading European manufacturers.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
The machine shown here was built to a customer’s order and has already been delivered. We can manufacture this machine for you at short notice – including consideration of individual options as required. This is a hydraulic heated press with electrically heated platens and a manual sliding table for pressing, laminating, and forming processes under elevated temperature conditions.
Base price: €23,500 net
Options (on request):
The listed options are based on completed customer projects and enable targeted adaptation of the machine for the respective application. The base machine is a functional standard version – in practice, it is usually supplemented with additional equipment and configured specifically for the project.
====
Technical Data & Information:
==== General Information
* Design: Double-column press
* Pressing force: 30 t (adjustable)
* Total weight: approx. 3,200 kg
* Dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm
==== Working Area
* Table size: 700 × 500 mm
* Heated plates: 700 × 500 × 65 mm
* Installation height: max. 800 mm
* Table traverse: 500 mm (manual)
==== Table & Ram
* Ram stroke: 600 mm
* Cylinder diameter: Ø 130 mm
* Piston rod: Ø 80 mm
* 8-fold guide for parallelism
==== Speeds
* Working speed: 9 mm/s
* Return speed: 25 mm/s
==== Hydraulics & Drive
* Working pressure: max. 240 bar
* Pump capacity: 12 l/min
* Motor power: 3 kW
* Hydraulic tank: 80 l
* Pressure accuracy: ±5 bar
* Hydraulic system with air cooling
==== Controls & Operation
* SIEMENS S7-1200 controller with 7" touch panel
* Programmable parameters (stroke, pressure, time, cycles)
* Two-hand operation
* Electrical connection: 400 V / 50 Hz
* Total connected load: approx. 25 kW (including heating)
==== Equipment
* Electrically heated press plates up to 200 °C
* Temperature monitoring with sensors
* Passive pressure holding function up to 60 minutes
* Hydraulic and electronic overload protection
* Safety limit switches
* CE certification
* Two-layer coating according to RAL standard
Hodpfx Aisy H Dtzeqjl
=====
Hot pressing, laminating, plastics processing, rubber and composite material processing, molding
Heated press, hydraulic press, double-column press, thermal press, laminating press, industrial press
Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully conform to the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength is special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic components of our presses, we primarily use parts from leading European manufacturers.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2018
١١٨ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 209 9... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Gelsenkirchen
٣٬٣٩٩ km
مكبس بجدول منزلق
DurendusVulkanisierpresse
DurendusVulkanisierpresse
إعلان صغير
Gelsenkirchen
٣٬٣٩٩ km
مكبس سيرفو
DurendusVulkanisierpresse
DurendusVulkanisierpresse
إعلان صغير
Gelsenkirchen
٣٬٣٩٩ km
مكبس سيرفو
DurendusVulkanisierpresse
DurendusVulkanisierpresse
إعلان صغير
Gelsenkirchen
٣٬٣٩٩ km
مكبس تسخين
DurendusVulkanisierpresse
DurendusVulkanisierpresse
تم حذف إعلانك بنجاح
حدث خطأ





































