DMG NHX5000DMG
NHX5000
DMG NHX5000
DMG
NHX5000
سنة الصنع
٢٠٢٣
الحالة
مستعمل
الموقع
النمسا 

البيانات الأساسية
- اسم الماكينة:
- DMG NHX5000
- الشركة المصنعة:
- DMG
- طراز:
- NHX5000
- سنة الصنع:
- ٢٠٢٣
- الحالة:
- جاهز للاستخدام (مستعمل)
- ساعات التشغيل:
- ١٬٦١٢ h
السعر والموقع
- الموقع:
- , النمسا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
١٢٬٠٠٠ كجم
محاور
قدرة محرك المغزل:
٣٧٬٠٠٠ واط
أقصى سرعة للمغزل:
٢٠٬٠٠٠ دورة/دقيقة
مواصفات المحور
مسافة الحركة محور X:
٧٣٠ مم
مسافة الحركة لمحور Y:
٧٣٠ مم
مسافة الحركة لمحور Z:
٨٨٠ مم
مزيد من التفاصيل
مصنع وحدات التحكم:
FANUC
طراز وحدة التحكم:
F31iB with CELOS
عدد المحاور:
٤
تفاصيل العرض
- معرّف الإعلان:
- A23352278
- رقم المرجع:
- AT-MIL-DMG-2023-00001
- تحديث:
- آخر مرة في 18.11.2026
وصف
This 4-axis DMG NHX5000 was manufactured in 2023. It features X, Y and Z travels of 730, 730 and 880 mm, a 20,000 rpm spindle, and a 60-tool magazine. The machine also includes a two-station automatic pallet changer with 500 x 500 mm pallets. Consider the opportunity to buy this DMG NHX5000 horizontal machining centre. Contact us for further details.
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Itedpfxo Aky T As Acgop
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Itedpfxo Aky T As Acgop
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
إيطاليا
٣٬١٩٩ km
DMG MORI NHX-5000
DMG MORINHX-5000
DMG MORINHX-5000
ناجح
تم إرسال رسالتك.
إعلان صغير
Loyettes
٣٬٠٩٣ km
مركز تشغيل أفقي
DoosanHP 5100II
DoosanHP 5100II
ناجح
تم إرسال رسالتك.
إعلان صغير
Düsseldorf
٣٬٣٨٥ km
مركز تشغيل أفقي
DMG MORINHX 5000
DMG MORINHX 5000
ناجح
تم إرسال رسالتك.
إعلان صغير
Monheim am Rhein
٣٬٣٧٣ km
مركز التصنيع الأفقي CNC
DMG MORINHX 5000
DMG MORINHX 5000
ناجح
تم إرسال رسالتك.
إعلان صغير
Iași
٢٬٢٨١ km
مركز تشغيل رأسي
FANUCRobodrill ᾱ-D21MiB5
FANUCRobodrill ᾱ-D21MiB5
ناجح
تم إرسال رسالتك.
إعلان صغير
النمسا
٣٬١٩٩ km
دي إم جي موري NHX 5000
DMG MORINHX 5000
DMG MORINHX 5000
ناجح
تم إرسال رسالتك.
مزاد
انتهى المزاد
Bayern
٣٬٠٥٥ km
مركز تشغيل أفقي
DMGNHX 5000
DMGNHX 5000
ناجح
تم إرسال رسالتك.
إعلان صغير
بلجيكا
٣٬١٩٩ km
هاس VM-6
HAASVM-6
HAASVM-6
تم حذف إعلانك بنجاح
حدث خطأ














































































































