باستخدام الحاسب الآلي المخرطة

DMG CTX Alpha 500 , 31256

The machine is in good technical condition, after prior agreement, testing is possible. Control system – Siemens
Including filtration. Bed inclination
Bed material
Number of guides
45??
cast iron
3 (4 with Y-axis option)
WORKING SPACE (V1- V4)
Swing diameter above bed inch 19.69
Swing diameter above cross slide inch 11.42
Largest turning diameter inch 7.87 200 ч
Distance between centers inch 30.71
Largest turning length inch 19.69 15.82 20
Max. weight of flying unsupported part of workpiece lb 35
Max. distance of center of gravity of flying unsupported part of workpiece inch 165 from spindle face
Max. weight of workpiece clamped between centers lb 100
X-axis travel length inch 7.48. Y-axis travel length (OР.) inches 3.14 (+/- 1.57)
Z1-axis travel length inches
Z3-axis travel length inches
Spindle axis height above floor inches
20.67
Chodpfxoxiu Ixs Ag Soc
21.65
39.26 (38.77+1.18)
MAIN SPINDLE
Spindle face (flat face) type FL 140h5
Chuck (diameter) inches 6.69 (op. 8.26)
Rod diameter inches 2.00787408
Spindle hole diameter inches 2.87401584
Guide bush diameter inches 2.04724416
Front bearing inner diameter inches 3.937008
Spindle bearing lubrication type grease
Power, max.100/40% ED load pc 20.82/36.20
Speed ​​range, 100% ED load rpm 6000
Speed ​​range, 40% ED load rpm 6000
Nominal speed rpm 1500
Torque, max. 100/40% ED load ft*lb 93.72/125.46
Voltage type, number of ranges AC/1
Motor type ISM52