ماكينة القولبة بحقن البلاستيكDEMAG
IntElect2 350/830-2200
ماكينة القولبة بحقن البلاستيك
DEMAG
IntElect2 350/830-2200
سنة الصنع
٢٠٢٢
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Wembley 

البيانات الأساسية
- اسم الماكينة:
- ماكينة القولبة بحقن البلاستيك
- الشركة المصنعة:
- DEMAG
- طراز:
- IntElect2 350/830-2200
- رقم الماكينة:
- IntElect2 350/830-2200
- سنة الصنع:
- ٢٠٢٢
- الحالة:
- شبه جديد (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ١٤٬٥٠٠ h
السعر والموقع
- الموقع:
- 12 Hallmark Centre, HA9 0LB London, United Kingdom

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
٢١٬٠٠٠ كجم
تفاصيل القدرة
جهد الدخل:
٤٠٠ V
تردد الإدخال:
٥٠ هرتز
التوثيق والشهادة
توثيق / دليل
مزيد من التفاصيل
قوة التثبيت:
٣٥٠ كيلو نيوتن
المسافة بين الأعمدة:
٨٣٠ مم
قوة الطرد:
٦٠ N
شوط القاذف:
٢٥٠ مم
ضغط الحقن:
٢٬٤٢٦ شريط
وزن الحقن:
٨٢٠ g
ارتفاع القالب (الحد الأدنى):
٤٠٠ مم
قطر البرغي:
٦٠ مم
تفاصيل العرض
- معرّف الإعلان:
- A23369110
- رقم المرجع:
- PM175
- تحديث:
- آخر مرة في 23.11.2026
وصف
Sumitomo Demag IntElect2 350/830-2200 – 2022 – 15,000 Hours .
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year of manufacture: 2022
Machine type: All-electric injection moulding machine
Condition: Very good, available for inspection under power by appointment
Operating hours: Approximately 15,000 hours
Machine description
For sale is a 2022 Sumitomo Demag IntElect2 350/830-2200 all-electric injection moulding machine.
This modern, high-performance injection moulding machine is in very good working condition and remains in production. It has only approximately 15,000 operating hours .
The IntElect2 series is known for its precision, energy efficiency, repeatability and high-performance electric drive technology.
With a 350-tonne clamping force and 60 mm screw, this machine is suitable for a wide range of demanding plastic injection moulding applications.
The machine is available for inspection and demonstration under power by appointment
No robot included.
Technical specifications
General
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year: 2022
Clamping force: 3,500 kN / 350 tonnes
Operating hours: Approximately 15,000
Drive system: All-electric
Condition: Available for inspection under power by appointment
Laodpfxo Algp As Aphei
Clamping unit
Maximum mould opening stroke: 725 mm
Tie-bar spacing: 830 × 830 mm
Maximum mould weight: 6,600 kg
Injection unit
Injection unit: 2200
Screw diameter: 60 mm
Maximum injection volume: 891 cm³
Maximum injection speed: 160 mm/s
Maximum injection pressure: 2,426 bar
Ejector
Ejector stroke: 250 mm
Standard ejector force: 60 kN
Additional information
Located in the UK
Low operating hours for its age
No robot included
Available for inspection under power by appointment
Sale information
A fantastic opportunity to purchase a modern 2022 Sumitomo Demag all-electric injection moulding machine with relatively low operating hours.
Further photographs, technical information and inspection appointments available on request.
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year of manufacture: 2022
Machine type: All-electric injection moulding machine
Condition: Very good, available for inspection under power by appointment
Operating hours: Approximately 15,000 hours
Machine description
For sale is a 2022 Sumitomo Demag IntElect2 350/830-2200 all-electric injection moulding machine.
This modern, high-performance injection moulding machine is in very good working condition and remains in production. It has only approximately 15,000 operating hours .
The IntElect2 series is known for its precision, energy efficiency, repeatability and high-performance electric drive technology.
With a 350-tonne clamping force and 60 mm screw, this machine is suitable for a wide range of demanding plastic injection moulding applications.
The machine is available for inspection and demonstration under power by appointment
No robot included.
Technical specifications
General
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year: 2022
Clamping force: 3,500 kN / 350 tonnes
Operating hours: Approximately 15,000
Drive system: All-electric
Condition: Available for inspection under power by appointment
Laodpfxo Algp As Aphei
Clamping unit
Maximum mould opening stroke: 725 mm
Tie-bar spacing: 830 × 830 mm
Maximum mould weight: 6,600 kg
Injection unit
Injection unit: 2200
Screw diameter: 60 mm
Maximum injection volume: 891 cm³
Maximum injection speed: 160 mm/s
Maximum injection pressure: 2,426 bar
Ejector
Ejector stroke: 250 mm
Standard ejector force: 60 kN
Additional information
Located in the UK
Low operating hours for its age
No robot included
Available for inspection under power by appointment
Sale information
A fantastic opportunity to purchase a modern 2022 Sumitomo Demag all-electric injection moulding machine with relatively low operating hours.
Further photographs, technical information and inspection appointments available on request.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2025
٢ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+44 7989 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Kreuztal
٣٬٣٠٦ km
ماكينة القولبة بحقن البلاستيك
Sumitomo (SHI) DemagIntElect 2 350/830-2200 mit Roboter-Sys
Sumitomo (SHI) DemagIntElect 2 350/830-2200 mit Roboter-Sys
تم حذف إعلانك بنجاح
حدث خطأ


































