آلة تشكيل الملفات - ثناية ثلاثية الرولاتCurvatrice
DS60
آلة تشكيل الملفات - ثناية ثلاثية الرولات
Curvatrice
DS60
EXW في بي بالإضافة إلى ضريبة القيمة المضافة
٢٬٩٥٠ €
سنة الصنع
٢٠٠٠
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Metelen 

البيانات الأساسية
- اسم الماكينة:
- آلة تشكيل الملفات - ثناية ثلاثية الرولات
- الشركة المصنعة:
- Curvatrice
- طراز:
- DS60
- سنة الصنع:
- ٢٠٠٠
- الحالة:
- جيد (مستخدم)
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
EXW في بي بالإضافة إلى ضريبة القيمة المضافة
٢٬٩٥٠ €
- الموقع:
- Metelen, ألمانيا

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A23348291
- تحديث:
- آخر مرة في 18.11.2026
وصف
Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Ready for Use & with Special Modification
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
Iiode Akvcdopfx Akgoi
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
Iiode Akvcdopfx Akgoi
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر ظهور على الإنترنت: اليوم
مسجل منذ: 2026
١٦ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 2556 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Hergensweiler
٢٬٩٥٣ km
القرص الدوار اللحام ، القرص الدوار ،
ProtecW 5000
ProtecW 5000
ناجح
تم إرسال رسالتك.
إعلان صغير
Balaguer
٣٬١٩٦ km
100t ذاتية المحاذاة لحام الخراطة
OerlikonLP100
OerlikonLP100
ناجح
تم إرسال رسالتك.
إعلان صغير
Hergensweiler
٢٬٩٥٣ km
طاولة تدوير اللحام، طاولة دوارة
Protec 10 ToKT 10 000
Protec 10 ToKT 10 000
ناجح
تم إرسال رسالتك.
إعلان صغير
Kirchheim unter Teck
٣٬٠٤٩ km
آلة طحن أسطوانية - خارجي
KELLENBERGERR175-1500
KELLENBERGERR175-1500
ناجح
تم إرسال رسالتك.
إعلان صغير
Écouflant
٣٬٥٦٦ km
ماكينة ثني الأنابيب CNC
DAVIMCP18
DAVIMCP18
ناجح
تم إرسال رسالتك.
إعلان صغير
Ringaudai
٣٬١٧٦ km
مجموعة اللحام
FRONIUSPLASMA WELDING
FRONIUSPLASMA WELDING
ناجح
تم إرسال رسالتك.
إعلان صغير
ألمانيا
٣٬١٤٥ km
آلة ثني الصفائح المعدنية بأربع أسطوانات
IMCAR4RH 17/5
IMCAR4RH 17/5
ناجح
تم إرسال رسالتك.
إعلان صغير
Dortmund
٣٬٣٧٥ km
آلة طحن أداة عالمية باستخدام الحاسب الآلي
AVIAFNE 50 N / TNC 410
AVIAFNE 50 N / TNC 410
ناجح
تم إرسال رسالتك.
إعلان صغير
Wien
٢٬٦٩٣ km
ماكينة ثني الصفائح المعدنية - 4 بكرات
AKBENDAHS 30/08
AKBENDAHS 30/08
ناجح
تم إرسال رسالتك.
إعلان صغير
Ditzingen
٣٬٠٩٠ km
قاطع أنابيب
Orbitalum
Orbitalum
تم حذف إعلانك بنجاح
حدث خطأ

























































































































