منشار ميتري نصف أوتوماتيكيCURSAL
TRV 400
منشار ميتري نصف أوتوماتيكي
CURSAL
TRV 400
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٤٬٧٠٠ €
سنة الصنع
١٩٩٧
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Roding 

البيانات الأساسية
- اسم الماكينة:
- منشار ميتري نصف أوتوماتيكي
- الشركة المصنعة:
- CURSAL
- طراز:
- TRV 400
- رقم الماكينة:
- 972712
- سنة الصنع:
- ١٩٩٧
- الحالة:
- جاهز للاستخدام (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٤٬٧٠٠ €
- الموقع:
- Roding, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
٦٠٠ كجم
الطول الكلي:
٤٬٦٠٠ مم
الارتفاع الكلي:
٩٠٠ مم
تفاصيل القدرة
جهد الدخل:
٣٨٠ V
مزيد من التفاصيل
قدرة:
٣٫٧ كيلوواط (٥٫٠٣ حصان)
ارتفاع القطع (أقصى):
١٠٠ مم
العرض الأقصى للقطع:
٢٢٠ مم
قطر فوهة الاستخراج:
١٢٠ مم
قطر شفرة المنشار:
٤٠٠ مم
تفاصيل العرض
- معرّف الإعلان:
- A23315865
- تحديث:
- آخر مرة في 13.11.2026
وصف
Offering a manually operated chop saw, model TRV 400, manufactured by "CURSAL".
The maximum chop cross-section is 100 x 220 mm. The machine is equipped with a two-hand control and easily adjustable pneumatic stops.
Iodpfe Aivp Hex Akgoii
1. The saw system consists of a 2-meter powered roller conveyor (from the right) with a 0.35 kW motor.
2. The semi-automatic chop saw has a simple two-hand release and must be operated manually.
The saw blade diameter is 400 mm. Possible wood cross-section up to 120 x 220 mm (maximum cross-section of the cut: 14,000 mm2).
Compressed air connection: 6-10 atm. Electrical drive power: 3 kW.
3. A carpet conveyor running to the left for chop pieces and offcuts, with a 0.35 kW motor.
With this system, softwood cant pieces of 85 x 85 mm were cut into short pencil blanks.
The system is in very good condition and has only been used rarely since 2002.
Inspection is possible at any time.
The system is offered and sold in its current condition. No guarantees, warranties, or return promises.
Original technical documentation is available.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
The maximum chop cross-section is 100 x 220 mm. The machine is equipped with a two-hand control and easily adjustable pneumatic stops.
Iodpfe Aivp Hex Akgoii
1. The saw system consists of a 2-meter powered roller conveyor (from the right) with a 0.35 kW motor.
2. The semi-automatic chop saw has a simple two-hand release and must be operated manually.
The saw blade diameter is 400 mm. Possible wood cross-section up to 120 x 220 mm (maximum cross-section of the cut: 14,000 mm2).
Compressed air connection: 6-10 atm. Electrical drive power: 3 kW.
3. A carpet conveyor running to the left for chop pieces and offcuts, with a 0.35 kW motor.
With this system, softwood cant pieces of 85 x 85 mm were cut into short pencil blanks.
The system is in very good condition and has only been used rarely since 2002.
Inspection is possible at any time.
The system is offered and sold in its current condition. No guarantees, warranties, or return promises.
Original technical documentation is available.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد: الأسبوع الماضي
مسجل منذ: 2015
٥ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 9461 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Izdebnik
٢٬٧٣٤ km
تحسين خط القطع العرضي
CURSALTRV S400
CURSALTRV S400
ناجح
تم إرسال رسالتك.
إعلان صغير
Marano Vicentino
٢٬٧١٢ km
تحسين خط القطع العرضي
CURSALTRV 400
CURSALTRV 400
تم حذف إعلانك بنجاح
حدث خطأ






























