خزانة اختبار درجة الحرارة محمية مسبقًاCTS
T-30/950 Ex/I
خزانة اختبار درجة الحرارة محمية مسبقًا
CTS
T-30/950 Ex/I
سنة الصنع
٢٠١١
الحالة
مستعمل
الموقع
Borken 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- خزانة اختبار درجة الحرارة محمية مسبقًا
- الشركة المصنعة:
- CTS
- طراز:
- T-30/950 Ex/I
- سنة الصنع:
- ٢٠١١
- الحالة:
- جيد جدًا (مستعمل)
السعر والموقع
- الموقع:
- Einsteinstraße 8a, 46325 Borken, Deutschland

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A7538378
- رقم المرجع:
- 23117
- تحديث:
- آخر مرة في ٢٧.٠٦.٢٠٢٥
وصف
CTS
Type: T-30/950 Ex/I
CTS Temperature Test Chamber, Explosion-Proof
Control – 32-bit controller
LCD control panel
Digital display for set and actual values
Numerical input of set values
Error messages in plain text
RS 232 interface
Free switching channels for product-side test specimen activation
Temperature Testing:
Kljdpfx Asihb Amjavsr
Temperature range: -30°C to +80°C
Temperature deviation: ±0.3 K over time
Temperature change rate:
Heating: 2 K/min
Cooling: 1.5 K/min down to -10°C
Thermal radiation: approx. 1000 W at +20°C
approx. 200 W at -25°C
Nitrogen inerting with residual oxygen monitoring
With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the
o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate).
The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch.
O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air.
Afterwards, the gas is returned to the test chamber via a second flame arrestor.
The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix.
The gas system is currently deactivated!
All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment.
Dimensions:
Test chamber volume: 950 liters
Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm
External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm
Operating data:
Electrical connection: 400V +6/-10 %, 3/N, 50 Hz
Nominal power: 21.6 kW
Rated current: 36.5 A
Protection class: IP 54
Condensate drain: non-pressurized, R 1/2" inner thread
Sound pressure level:
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Type: T-30/950 Ex/I
CTS Temperature Test Chamber, Explosion-Proof
Control – 32-bit controller
LCD control panel
Digital display for set and actual values
Numerical input of set values
Error messages in plain text
RS 232 interface
Free switching channels for product-side test specimen activation
Temperature Testing:
Kljdpfx Asihb Amjavsr
Temperature range: -30°C to +80°C
Temperature deviation: ±0.3 K over time
Temperature change rate:
Heating: 2 K/min
Cooling: 1.5 K/min down to -10°C
Thermal radiation: approx. 1000 W at +20°C
approx. 200 W at -25°C
Nitrogen inerting with residual oxygen monitoring
With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the
o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate).
The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch.
O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air.
Afterwards, the gas is returned to the test chamber via a second flame arrestor.
The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix.
The gas system is currently deactivated!
All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment.
Dimensions:
Test chamber volume: 950 liters
Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm
External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm
Operating data:
Electrical connection: 400V +6/-10 %, 3/N, 50 Hz
Nominal power: 21.6 kW
Rated current: 36.5 A
Protection class: IP 54
Condensate drain: non-pressurized, R 1/2" inner thread
Sound pressure level:
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
إرسال طلب
هاتف & فاكس
+49 2861 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Schmölln
٣٬١٠٠ km
غرفة باردة
Dresdner Kühlanlagenbau
Dresdner Kühlanlagenbau
إعلان صغير
Tata
٢٬٥٦١ km
مكثف مبرد سائل
Güntner GVH 090.1.D/5-M(D)680,4 /579,2 kw
Güntner GVH 090.1.D/5-M(D)680,4 /579,2 kw
إعلان صغير
Hochdorf
٣٬٠٥٢ km
وحدة تبريد درجة الحرارة (TCU)
SingleCompact WK3-160-9-50 (IM160F)
SingleCompact WK3-160-9-50 (IM160F)
إعلان صغير
Niedźwiedź
٢٬٦٩٨ km
وحدة ضاغط ثنائية المرحلتين
BitzerS6G-25.2Y (x4)
BitzerS6G-25.2Y (x4)
إعلان صغير
Delmenhorst
٣٬٤٤٤ km
1000 لتر خزان عازلة الضغط التخزين
10539
10539
إعلان صغير
Hillegom
٣٬٥٨٠ km
المبخر
GoedhartVNS 66507 G
GoedhartVNS 66507 G
إعلان صغير
Wiefelstede
٣٬٤٨٨ km
نظام التهوية
HeimerWK-61
HeimerWK-61
إعلان صغير
Niedźwiedź
٢٬٦٩٨ km
أكثر برودة
GüntnerS-GHN 066D/37
GüntnerS-GHN 066D/37
إعلان صغير
Borken
٣٬٤٣٢ km
خزانة اختبار درجة الحرارة
CTSTSR-30/1000
CTSTSR-30/1000
إعلان صغير
Wiefelstede
٣٬٤٨٨ km
خزان ضغط من الفولاذ المقاوم للصدأ
UM Alloy Products316L MAWP 9 BAR
UM Alloy Products316L MAWP 9 BAR
تم حذف إعلانك بنجاح
حدث خطأ





































































































