ماكينة القولبة بحقن البلاستيكCronoplast
Babyplast UAI I/12
ماكينة القولبة بحقن البلاستيك
Cronoplast
Babyplast UAI I/12
في بي بالإضافة إلى ضريبة القيمة المضافة
١٠٬٠٠٠ €
سنة الصنع
٢٠٢١
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Erkelenz 

البيانات الأساسية
- اسم الماكينة:
- ماكينة القولبة بحقن البلاستيك
- الشركة المصنعة:
- Cronoplast
- طراز:
- Babyplast UAI I/12
- رقم الماكينة:
- UA0374
- سنة الصنع:
- ٢٠٢١
- الحالة:
- مستعمل
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
في بي بالإضافة إلى ضريبة القيمة المضافة
١٠٬٠٠٠ €
- الموقع:
- Erkelenz, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
١٤٠ كجم
المحرك وعلبة التروس
حجم الإزاحة:
١٥ سم³
تفاصيل القدرة
جهد الدخل:
٤٠٠ V
تردد الإدخال:
٥٠ هرتز
تيار الدخل:
٨ A
مزيد من التفاصيل
ضغط الحقن:
٢٬٠٢٥ شريط
تفاصيل العرض
- معرّف الإعلان:
- A23338001
- تحديث:
- آخر مرة في 15.11.2026
وصف
For sale: Babyplast auxiliary injection unit, type UAI I/12, manufactured in 2021, mobile on rollers, with touchscreen control. Autonomous injection unit for mounting on an injection molding machine or on the mold (e.g., for multi-component, overmolding, or insert applications).
Technical data (according to the nameplate):
- Manufacturer: Cronoplast S.L., Abrera (Barcelona), Spain
- Type: Babyplast UAI I/12, schema BP338, serial no. UA0374, manufactured in 2021
Iedpfx As Akiavodxetp
- Total weight: 140 kg
- Input voltage: 400 V 3L+N or 230 V 3L
- Input frequency: 50/60 Hz
- Rated current: 7.5 A (400 V) or 11 A (230 V)
- Short-circuit current Icu: 3.5 kA
Technical data (according to manufacturer's specifications Babyplast I/12):
- Injection volume (displacement): 3 to 15 cm³ depending on the piston
- Piston diameter: 10 to 18 mm (5 interchangeable pistons; 10 mm = max. 4 cm³, 18 mm = max. 15 cm³)
- Injection pressure: approx. 815 to 2,025 bar depending on the piston
- Hydraulic injection unit with piston (no screw), therefore no screw diameter specification
- Mounting: directly to mold or machine, horizontally or vertically, via two standard flanges on a fixed or moving mold half
- Interface to the main machine via a few potential-free contacts, operates hydraulically and electronically independently
- Cooling water requirement: approx. 100 l/h
- Note: The unit does not have its own clamping unit, therefore no clamping force and no tie bar spacing. Overall length and width available upon request.
Equipment as shown in the photos:
- Touchscreen control panel with emergency stop, key switch, main switch, and pressure display
- Material hopper with conveying unit
- Connection cables, hoses, and hydraulic/pneumatic connections
- Operating manual (German, Rev. 10)
- DGUV-V3 inspection label
Used, signs of wear and tear as shown in the photos. The machine can be inspected during operation (appointment by arrangement). Disassembly and loading by the buyer; loading with a forklift is possible. Location: Erkelenz. Collection only.
Sale excludes any warranty, guarantee, and right of return.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Technical data (according to the nameplate):
- Manufacturer: Cronoplast S.L., Abrera (Barcelona), Spain
- Type: Babyplast UAI I/12, schema BP338, serial no. UA0374, manufactured in 2021
Iedpfx As Akiavodxetp
- Total weight: 140 kg
- Input voltage: 400 V 3L+N or 230 V 3L
- Input frequency: 50/60 Hz
- Rated current: 7.5 A (400 V) or 11 A (230 V)
- Short-circuit current Icu: 3.5 kA
Technical data (according to manufacturer's specifications Babyplast I/12):
- Injection volume (displacement): 3 to 15 cm³ depending on the piston
- Piston diameter: 10 to 18 mm (5 interchangeable pistons; 10 mm = max. 4 cm³, 18 mm = max. 15 cm³)
- Injection pressure: approx. 815 to 2,025 bar depending on the piston
- Hydraulic injection unit with piston (no screw), therefore no screw diameter specification
- Mounting: directly to mold or machine, horizontally or vertically, via two standard flanges on a fixed or moving mold half
- Interface to the main machine via a few potential-free contacts, operates hydraulically and electronically independently
- Cooling water requirement: approx. 100 l/h
- Note: The unit does not have its own clamping unit, therefore no clamping force and no tie bar spacing. Overall length and width available upon request.
Equipment as shown in the photos:
- Touchscreen control panel with emergency stop, key switch, main switch, and pressure display
- Material hopper with conveying unit
- Connection cables, hoses, and hydraulic/pneumatic connections
- Operating manual (German, Rev. 10)
- DGUV-V3 inspection label
Used, signs of wear and tear as shown in the photos. The machine can be inspected during operation (appointment by arrangement). Disassembly and loading by the buyer; loading with a forklift is possible. Location: Erkelenz. Collection only.
Sale excludes any warranty, guarantee, and right of return.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد على الإنترنت: البارحة
مسجل منذ: 2023
١٩ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 2433 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ










