ملمع اهتزازيCORMAK
PVT2.3KG
ملمع اهتزازي
CORMAK
PVT2.3KG
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٧٣ €
سنة الصنع
٢٠٢٦
الحالة
جديد
الموقع
Siedlce 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٧٣ €
- الموقع:
- Brzeska 120, 08-110 Siedlce, Polska

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A23303709
- تحديث:
- آخر مرة في 09.11.2026
وصف
CORMAK PVT2.3KG Vibratory Tumbler
The CORMAK PVT2.3KG Vibratory Tumbler is designed for polishing, rust removal, degreasing, and deburring of small components. The 250 mm diameter bowl and maximum load capacity of 2.3 kg allow small workpieces to be processed using appropriately selected finishing media.
Main Advantages of the PVT2.3KG Vibratory Tumbler
The vibratory tumbler enables surface finishing of multiple workpieces in a single batch. Depending on the finishing media used, the machine can operate as a vibratory deburring machine or be used for cleaning and polishing.
The selection of abrasive media and processing time should take into account the material, geometry, and surface condition of the workpieces.
Four applications: polishing, rust removal, degreasing, and deburring.
Maximum workpiece diameter of 178 mm – defines the maximum permissible size of the workpiece.
Ø 200 mm bowl opening – provides easy access for loading and unloading workpieces.
Ijdpfx Aj Aigu Ssngsii
230 V / 50 Hz power supply – allows connection to a standard single-phase electrical supply.
Compact dimensions of 250 × 250 × 400 mm – make it easy to position the machine at a workshop workstation.
Construction and Finishing Technology
The machine is equipped with a motor with an S1 continuous-duty power rating of 30 W and a bowl with a height of 115 mm.
The finishing process uses vibratory motion and contact between the workpieces and the finishing media.
The tumbler is designed for use with plastic finishing media containing abrasive additives.
Processing Time and Quality Control
The approximate degreasing time is 30 minutes, while rust removal typically takes 2 to 6 hours.
The actual processing time depends on the degree of contamination, corrosion, and the type of finishing media selected.
The results should be monitored during the processing cycle, adjusting its duration to achieve the required surface finish.
Applications
The vibratory tumbler is suitable for workshops and manufacturing facilities performing finishing operations on small components.
As a vibratory deburring machine, it assists in removing burrs and sharp edges. It can also be used to clean components before further processing operations.
Technical Specifications
Motor power (S1)
30 W
Power supply
230 V / 50 Hz
Dimensions
250 × 250 × 400 mm
Sound pressure level
70 dB(A)
Net/gross weight
4.2 / 4.8 kg
Shipping dimensions (W × L × H)
280 × 280 × 400 mm
Standard Equipment
Bowl with lid.
Finishing Media Not Included
Abrasive media / plastic finishing media – not included in the set.
The CORMAK PVT2.3KG Vibratory Tumbler is designed for polishing, rust removal, degreasing, and deburring of small components. The 250 mm diameter bowl and maximum load capacity of 2.3 kg allow small workpieces to be processed using appropriately selected finishing media.
Main Advantages of the PVT2.3KG Vibratory Tumbler
The vibratory tumbler enables surface finishing of multiple workpieces in a single batch. Depending on the finishing media used, the machine can operate as a vibratory deburring machine or be used for cleaning and polishing.
The selection of abrasive media and processing time should take into account the material, geometry, and surface condition of the workpieces.
Four applications: polishing, rust removal, degreasing, and deburring.
Maximum workpiece diameter of 178 mm – defines the maximum permissible size of the workpiece.
Ø 200 mm bowl opening – provides easy access for loading and unloading workpieces.
Ijdpfx Aj Aigu Ssngsii
230 V / 50 Hz power supply – allows connection to a standard single-phase electrical supply.
Compact dimensions of 250 × 250 × 400 mm – make it easy to position the machine at a workshop workstation.
Construction and Finishing Technology
The machine is equipped with a motor with an S1 continuous-duty power rating of 30 W and a bowl with a height of 115 mm.
The finishing process uses vibratory motion and contact between the workpieces and the finishing media.
The tumbler is designed for use with plastic finishing media containing abrasive additives.
Processing Time and Quality Control
The approximate degreasing time is 30 minutes, while rust removal typically takes 2 to 6 hours.
The actual processing time depends on the degree of contamination, corrosion, and the type of finishing media selected.
The results should be monitored during the processing cycle, adjusting its duration to achieve the required surface finish.
Applications
The vibratory tumbler is suitable for workshops and manufacturing facilities performing finishing operations on small components.
As a vibratory deburring machine, it assists in removing burrs and sharp edges. It can also be used to clean components before further processing operations.
Technical Specifications
Motor power (S1)
30 W
Power supply
230 V / 50 Hz
Dimensions
250 × 250 × 400 mm
Sound pressure level
70 dB(A)
Net/gross weight
4.2 / 4.8 kg
Shipping dimensions (W × L × H)
280 × 280 × 400 mm
Standard Equipment
Bowl with lid.
Finishing Media Not Included
Abrasive media / plastic finishing media – not included in the set.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر ظهور على الإنترنت: اليوم
مسجل منذ: 2020
٥٤٩ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+48 25 63... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Niederlangen
٣٬٤٩٣ km
رأى الفرقة - عمودي
MössnerSSF 1050
MössnerSSF 1050
ناجح
تم إرسال رسالتك.
إعلان صغير
ألمانيا
٣٬١٤٥ km
مسدس مخرطة أوتوماتيكية
INDEXB60
INDEXB60
ناجح
تم إرسال رسالتك.
إعلان صغير
Enschede
٣٬٤٦٣ km
آلة ثني دائرية
OSTASSMR-S 2070 x 170
OSTASSMR-S 2070 x 170
ناجح
تم إرسال رسالتك.
إعلان صغير
Velen
٣٬٤٣١ km
آلة طحن الأدوات - عالمية
OPTIMUMUF 100
OPTIMUMUF 100
ناجح
تم إرسال رسالتك.
إعلان صغير
ألمانيا
٣٬٢٠٨ km
آلة تشكيل الصفائح المعدنية
Walter EckoldKF653C
Walter EckoldKF653C
ناجح
تم إرسال رسالتك.
إعلان صغير
ألمانيا
٣٬٢٠٨ km
مخرطة
KnuthSinus 400/3000 D
KnuthSinus 400/3000 D
ناجح
تم إرسال رسالتك.
إعلان صغير
Neuendettelsau
٣٬٠٣٤ km
آلة طحن أسطوانية
KELLENBERGERRundschleimaschine UR125-600
KELLENBERGERRundschleimaschine UR125-600
ناجح
تم إرسال رسالتك.
إعلان صغير
Bellpuig
٣٬١٧٥ km
مكبس تقويم
HidrogarneSH-250
HidrogarneSH-250
ناجح
تم إرسال رسالتك.
إعلان صغير
Sehmatal
٣٬٠٣٨ km
مخرطة CNC
HWACHEONECO 5 VR
HWACHEONECO 5 VR
ناجح
تم إرسال رسالتك.
إعلان صغير
Ahaus
٣٬٤٤٣ km
اضغط على الفرامل - هيدروليكي
SIMATPRM 30.135
SIMATPRM 30.135
تم حذف إعلانك بنجاح
حدث خطأ






























































































