جدول الاختبارChroma Batteriepack-Tester
ATE 17020
جدول الاختبار
Chroma Batteriepack-Tester
ATE 17020
سعر ثابت دون ضريبة القيمة المضافة
٣٥٬٠٠٠ €
الحالة
مستعمل
الموقع
Borken 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٣٥٬٠٠٠ €
- الموقع:
- Einsteinstraße 8a, 46325 Borken, Deutschland

اتصل
تفاصيل العرض
- معرّف القائمة:
- A19479136
- الرقم المرجعي:
- 24588
- التحديث الأخير:
- في ١٧.١١.٢٠٢٥
الوصف
Chroma
Type: ATE 17020
The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification.
Particularly strong in:
- Lifetime testing, BMS verification, and validation of complex charging cycles
- High energy recovery – up to 85% efficiency
- Flexible expansion through numerous channels or higher current ranges
- Enterprise deployment with extensive safety features & data persistence
Technical data – Chroma ATE 17020 PTS
Feature Specification
Model: Chroma ATE 17020 PTS
System type: Regenerative battery pack test system (charge/discharge test)
Channel output: 600 W to 60 kW (modular and scalable)
Total output: Up to 600 kW (depending on configuration)
Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V
Current per channel: Depending on module: from a few amps up to >300 A per channel
Iedpfx Aswwrxaed Astp
Parallel operation: Yes, for higher current up to 2,600 A
Current and voltage accuracy: ±(0.05% of reading + 0.05% of range)
Power accuracy: ±0.1%
Transition time (charge/discharge): < 50 ms
Sampling rate (measured data): up to 50 kHz (with BatteryPro)
Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure
Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles
Number of channels: Up to 60 channels (expandable)
Communication: CAN, S-Bus, Ethernet, USB
Software: Chroma BatteryPro (test programming, real-time monitoring)
Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc.
Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%)
Cooling: Fan cooling, low waste heat due to energy recuperation
Temperature monitoring: Optionally integrable, range 0–90°C ±2°C
Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg)
Mains connection: 3-phase, 400 V AC (depending on model)
Applications: E-mobility, battery development, quality assurance, cell research
Weight: approx. 455 kg
Condition: used
Scope of delivery: (See picture)
(Specifications and technical data are subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Type: ATE 17020
The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification.
Particularly strong in:
- Lifetime testing, BMS verification, and validation of complex charging cycles
- High energy recovery – up to 85% efficiency
- Flexible expansion through numerous channels or higher current ranges
- Enterprise deployment with extensive safety features & data persistence
Technical data – Chroma ATE 17020 PTS
Feature Specification
Model: Chroma ATE 17020 PTS
System type: Regenerative battery pack test system (charge/discharge test)
Channel output: 600 W to 60 kW (modular and scalable)
Total output: Up to 600 kW (depending on configuration)
Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V
Current per channel: Depending on module: from a few amps up to >300 A per channel
Iedpfx Aswwrxaed Astp
Parallel operation: Yes, for higher current up to 2,600 A
Current and voltage accuracy: ±(0.05% of reading + 0.05% of range)
Power accuracy: ±0.1%
Transition time (charge/discharge): < 50 ms
Sampling rate (measured data): up to 50 kHz (with BatteryPro)
Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure
Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles
Number of channels: Up to 60 channels (expandable)
Communication: CAN, S-Bus, Ethernet, USB
Software: Chroma BatteryPro (test programming, real-time monitoring)
Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc.
Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%)
Cooling: Fan cooling, low waste heat due to energy recuperation
Temperature monitoring: Optionally integrable, range 0–90°C ±2°C
Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg)
Mains connection: 3-phase, 400 V AC (depending on model)
Applications: E-mobility, battery development, quality assurance, cell research
Weight: approx. 455 kg
Condition: used
Scope of delivery: (See picture)
(Specifications and technical data are subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2012
تقديم الطلب
الهاتف & فاكس
+49 2861 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ









