مركز تشغيل عمودي CNC، مركز تشغيل عمودي (VMC)، ماكينة تفريز (BAZ)، مركز تفريزCHIRON
FZ 22 L high speed
مركز تشغيل عمودي CNC، مركز تشغيل عمودي (VMC)، ماكينة تفريز (BAZ)، مركز تفريز
CHIRON
FZ 22 L high speed
سعر ثابت دون ضريبة القيمة المضافة
١٦٬٠٠٠ €
الحالة
مستعمل
الموقع
Hessisch Lichtenau 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
١٦٬٠٠٠ €
- الموقع:
- 37235 Hessisch Lichtenau
اتصل
تفاصيل العرض
- معرّف القائمة:
- A14161957
- الرقم المرجعي:
- 58870
- التحديث الأخير:
- في ٢٩.٠٦.٢٠٢٥
الوصف
Machine has a defect in the main spindle
CNC vertical machining center CHIRON type FZ 22 L high speed
Machining center with CNC control FANUC Series 21-M
serial no. 179-98 year of construction 1999
Travel X: 2000 mm, Y: 520 mm, Z: 630 mm
Table size 2700 x 570 mm
Table load 525 kg (per meter)
Tool holder SK 40 (DIN 69871)
Drilling capacity 35 mm
Tapping capacity M27
Tool diameter 75 mm
Diameter with free secondary positions 105 mm
Tool change speed tool - tool 2.0 sec.
Tool change speed from chip to chip 4.8 sec.
Distance spindle nose - table 190 to 820 mm
Spindle speed max. 10,500 rpm
Main spindle drive max. 18.5 kW
Mains connection 400 Volt, 50 Hz, 32 kVA
- Pendulum machining over 2 work areas (partition wall missing)
Iiedpfxoquhbgo Abxjh
- CNC control FANUC Series 21-M
- Tool changer 40-fold
- IKZ = internal coolant supply through the spindle
- Spray protection cabin with sliding door
- Indirect measuring system
- Coolant device with chip conveyor opposite
- Electronic handwheel
Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm
Weight of the machine approx. 7.5 tons.
Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm
Transport Weight on the truck approx. 10 ton.
Weight 7.2 tons.
good condition - machine has a defect on the main spindle
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
CNC vertical machining center CHIRON type FZ 22 L high speed
Machining center with CNC control FANUC Series 21-M
serial no. 179-98 year of construction 1999
Travel X: 2000 mm, Y: 520 mm, Z: 630 mm
Table size 2700 x 570 mm
Table load 525 kg (per meter)
Tool holder SK 40 (DIN 69871)
Drilling capacity 35 mm
Tapping capacity M27
Tool diameter 75 mm
Diameter with free secondary positions 105 mm
Tool change speed tool - tool 2.0 sec.
Tool change speed from chip to chip 4.8 sec.
Distance spindle nose - table 190 to 820 mm
Spindle speed max. 10,500 rpm
Main spindle drive max. 18.5 kW
Mains connection 400 Volt, 50 Hz, 32 kVA
- Pendulum machining over 2 work areas (partition wall missing)
Iiedpfxoquhbgo Abxjh
- CNC control FANUC Series 21-M
- Tool changer 40-fold
- IKZ = internal coolant supply through the spindle
- Spray protection cabin with sliding door
- Indirect measuring system
- Coolant device with chip conveyor opposite
- Electronic handwheel
Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm
Weight of the machine approx. 7.5 tons.
Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm
Transport Weight on the truck approx. 10 ton.
Weight 7.2 tons.
good condition - machine has a defect on the main spindle
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
تقديم الطلب
الهاتف & فاكس
+49 5602 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ