اضغط على الفرامل

Bystronic Xpert 40/1030

Press force: 400 kN
Total bending length: 1030 mm
Standard stroke [S]: 200 mm
Clearance [D]: 515 mm
Distance between columns: 1060 mm
Table width: 60 mm
X-axis backgauge travel range: 500 mm
X-axis travel: 300 mm
X-axis travel speed: 1500 mm/s
R-axis travel: 100 mm
R-axis travel speed: 500 mm/s
Z-axis travel: 955 mm
Z-axis approach speed: 2000 mm/s
Y-axis approach speed: 300 mm/s
Maximum Y-axis bending speed: 25 mm/s
Y-axis positioning accuracy: 0.004 mm
Oil capacity: 100 l
Main drive power: 7.5 kW
Weight: 4 t
Length, approx. [L]: 1520 mm
Width, approx. [W]: 1584 mm
Height without increased clearance and stroke, approx. [H]: 2449 mm

1. Intelligent control system and drive with an exceptionally low noise emission (below 75 dB) in the Xpert 40 enables part production with about 30% lower energy consumption compared to conventional electrically-driven machines.
2. ByVision software with a 22-inch LCD display and touch technology
3. Intelligent process control guidance with Energy Saver
4. Automatic tool protection system
5. Foot pedal
6. Electrically operated protective sliding doors
7. User manual on CD
8. Ambient temperature from 7°C to 35°C
9. Voltage: 400 V, 50 Hz, 3 Ph
10. 'Bend G2' – optical safety system with manual height adjustment
Hfedswv N Naopfx Af Heb
11. 6-axis backgauge (3 additional axes)
12. 3-backgauge set - Xpert 40 (N0002.0040.000) - Set for integrating a third backgauge in the press brake
13. Ergonomic LED lighting package - Light output: 1500 lux
14. Ergonomic front supports with table. Max. load is 35 kg.
15. 'At your fingertips' tool cabinet - accommodates 3m of tools within easy reach (1 set of punches and 2 sets of dies).
16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guiding system.
17. Ergo Bending Line Laser – Bystronic Bending Line Laser serves as a visual assistance for the operator by projecting a bending line on the material surface. The operator is supported by a virtual bending line when the backgauge fingers cannot be used (fully or partially). The laser line can be set at different heights depending on the die height (e.g., 55 / 100 mm), depending on material thickness or workpiece size.
18. Productive XPT clamping package (WILA NSCL II upper tool clamp and T12/90 table)
19. WILA hydraulic clamping package includes both upper and lower tool clamping with T12/90 table.
20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT-type (Wila) upper tool clamping allows tool mounting in 0 and 180° orientations.
21. T12/90 table (Productive XPT clamping package) – T12/90 table with a height of 90 mm and width of 72 mm offers extensive space for Z-bends.

The machine is fully operational. In continuous use.

Viewing and testing of the machine are welcome.

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.