مكبس خرامةBRUDERER
BSTA 180
مكبس خرامة
BRUDERER
BSTA 180
في بي بالإضافة إلى ضريبة القيمة المضافة
١٢٬٩٩٩ €
سنة الصنع
٢٠٠١
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Mühldorf am Inn 

البيانات الأساسية
- اسم الماكينة:
- مكبس خرامة
- الشركة المصنعة:
- BRUDERER
- طراز:
- BSTA 180
- رقم الماكينة:
- 11572
- سنة الصنع:
- ٢٠٠١
- الحالة:
- مستعمل
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٤٧٬٢٦٢ h
السعر والموقع
في بي بالإضافة إلى ضريبة القيمة المضافة
١٢٬٩٩٩ €
- الموقع:
- Mühldorf am Inn, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
١٬٩٥٠ كجم
تفاصيل العرض
- معرّف الإعلان:
- A22865645
- تحديث:
- آخر مرة في 17.11.2026
وصف
The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18T). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm, to accommodate different tools and material profiles. Additionally, a Siemens-manufactured Bruderer U control system is installed.
The machine is partially functional:
The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production.
The rubber mounts for the slides are brittle and are breaking off.
The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025.
Nominal force: 180 kN (18T)
Stroke rate: 100-1300 strokes per minute (variable)
Strip feed: Bruderer BZA 60
Adjustable stroke: 8-40 mm
Main drive: 16 kVA
Power supply: 400V / 50Hz
Table area: 300x400 mm
Strip feed height (adjustable): 50-100 mm
Max. strip width: 60 mm
Max. material thickness: 2 mm
Machine dimensions: approx. 1300x1000x2300 mm
Weight: 1950 kg
Operating hours: approx. 47262
The machine will be dismantled in week 46.
Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.
Kdodpez H H Dqefx Aphsw
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
The machine is partially functional:
The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production.
The rubber mounts for the slides are brittle and are breaking off.
The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025.
Nominal force: 180 kN (18T)
Stroke rate: 100-1300 strokes per minute (variable)
Strip feed: Bruderer BZA 60
Adjustable stroke: 8-40 mm
Main drive: 16 kVA
Power supply: 400V / 50Hz
Table area: 300x400 mm
Strip feed height (adjustable): 50-100 mm
Max. strip width: 60 mm
Max. material thickness: 2 mm
Machine dimensions: approx. 1300x1000x2300 mm
Weight: 1950 kg
Operating hours: approx. 47262
The machine will be dismantled in week 46.
Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.
Kdodpez H H Dqefx Aphsw
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2023
١ إعلان على الإنترنت
إرسال طلب
هاتف & فاكس
+49 8631 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Plettenberg
٣٬٣٣٢ km
آلة التثقيب ذات عمود مزدوج
BRUDERERBSTA 20
BRUDERERBSTA 20
تم حذف إعلانك بنجاح
حدث خطأ













