منشرة كاملة (ثابتة)Brenta
Verticale bandzaag / automat. draaiwagen
منشرة كاملة (ثابتة)
Brenta
Verticale bandzaag / automat. draaiwagen
EXW في بي بالإضافة إلى ضريبة القيمة المضافة
٧٩٬٩٨٥ €
سنة الصنع
١٩٨٦
الحالة
مستعمل
الموقع
Beilen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- منشرة كاملة (ثابتة)
- الشركة المصنعة:
- Brenta
- سنة الصنع:
- ١٩٨٦
- الحالة:
- مستعمل
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
EXW في بي بالإضافة إلى ضريبة القيمة المضافة
٧٩٬٩٨٥ €
- الموقع:
- Beilen, هولندا

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A21600703
- تحديث:
- آخر مرة في ٢٦.٠٣.٢٠٢٦
وصف
We are offering this used Brenta Vertical Band Saw with automatic turning carriage.
Year of manufacture: 1986
Vertical saw:
Type Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type Progress 750 Machine no.: 409621 S268 N1143886
Maximum cutting length: 12 meters
In the various photos, you can see:
- overall view of the saw
- saw machine nameplate
- saw with extraction pit
- automatic line behind the saw
- pit under the lower wheel
- infeed line from outside
- infeed line as seen from inside
- outfeed line inside
- extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain
- collection bin behind the outfeed line
Dcedpfx Aoyxhq Uoa Ejf
- collection bin seen from the other side. With red button operable both here and from the machine room
- overview of the outfeed line
- machine plate of the saw carriage
- saw carriage in the outer position, where the log can be loaded
- control room behind the saw
- control room interior. Electronic measurement setting and control of all infeed and outfeed lines
- wall-mounted electronics across from saw. Control current with relays, which can also be operated manually
- Atlas Copco GX 11 FF compressor
- Compressor nameplate, year of manufacture 2005
- Grass Air DW 31 air dryer
- Stellite adjustment blocks for the guides where the saw blades run through
Technical information:
- The machine must be supplied with air, hydraulics, and electricity (including control current)
- The wheels (upper and lower) were ground approximately three years ago and can last for many more years.
- Infeed conveyor control cabinet was renewed in 2025
- At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment.
This Brenta vertical band saw with automatic turning carriage is an excellent combination.
The listed price is based on the EXW Incoterm, with dismantling by the buyer.
If you have any questions or require further information, please feel free to contact us or give us a call.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Year of manufacture: 1986
Vertical saw:
Type Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type Progress 750 Machine no.: 409621 S268 N1143886
Maximum cutting length: 12 meters
In the various photos, you can see:
- overall view of the saw
- saw machine nameplate
- saw with extraction pit
- automatic line behind the saw
- pit under the lower wheel
- infeed line from outside
- infeed line as seen from inside
- outfeed line inside
- extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain
- collection bin behind the outfeed line
Dcedpfx Aoyxhq Uoa Ejf
- collection bin seen from the other side. With red button operable both here and from the machine room
- overview of the outfeed line
- machine plate of the saw carriage
- saw carriage in the outer position, where the log can be loaded
- control room behind the saw
- control room interior. Electronic measurement setting and control of all infeed and outfeed lines
- wall-mounted electronics across from saw. Control current with relays, which can also be operated manually
- Atlas Copco GX 11 FF compressor
- Compressor nameplate, year of manufacture 2005
- Grass Air DW 31 air dryer
- Stellite adjustment blocks for the guides where the saw blades run through
Technical information:
- The machine must be supplied with air, hydraulics, and electricity (including control current)
- The wheels (upper and lower) were ground approximately three years ago and can last for many more years.
- Infeed conveyor control cabinet was renewed in 2025
- At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment.
This Brenta vertical band saw with automatic turning carriage is an excellent combination.
The listed price is based on the EXW Incoterm, with dismantling by the buyer.
If you have any questions or require further information, please feel free to contact us or give us a call.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد على الإنترنت: البارحة
مسجل منذ: 2026
١ إعلان على الإنترنت
إرسال طلب
هاتف & فاكس
+31 6 558... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Borken
٣٬٤٤٠ km
فراغ مضخة 200 متر/ساعة
LeyboldSogevac SV 200 (10927)
LeyboldSogevac SV 200 (10927)
إعلان صغير
Geiselwind
٣٬٠٩٠ km
ناقل بكرة البوابة مع ناقل متقاطع
EWD EstererRG 2000 Q
EWD EstererRG 2000 Q
إعلان صغير
Rietmolen
٣٬٤٦٥ km
منشرة كاملة (ثابتة)
BrentaETYELEC + PROGRESS
BrentaETYELEC + PROGRESS
إعلان صغير
Hradec Králové
٢٬٩٠٠ km
دهان / كشك رش
Reinox300x235
Reinox300x235
إعلان صغير
Leoben
٢٬٦٦٥ km
منشار إطار متأرجح
EstererLSH
EstererLSH
إعلان صغير
Stranice
٢٬٥٦٦ km
منشرة كاملة (ثابتة)
WRAVORWRC 1250 AC
WRAVORWRC 1250 AC
إعلان صغير
Hradec Králové
٢٬٩٠٠ km
دهان حائط / بخاخ
Reinox300x185
Reinox300x185
إعلان صغير
Szany
٢٬٥٨٤ km
منشرة كاملة (ثابتة)
WravorWRC 1150 AC
WravorWRC 1150 AC
إعلان صغير
Stockheim
٣٬٠٩٦ km
منشار شريطي عمودي عالي الأداء للكتل
CANALIPACIFIC
CANALIPACIFIC
إعلان صغير
Gorzów Wielkopolski
٣٬١٦١ km
منشار شريطي عمودي مزود بوحدات تغذية
SCHULTEVB12
SCHULTEVB12
تم حذف إعلانك بنجاح
حدث خطأ





























































































































