بوليجراف HBC140s (2x75 كيلو واط)

Bollegraaf HBC 140

Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor:

Bollegraaf HBC140s Baler (2x75kW).

Baler:
Weight: 47.100 kg

Construction year: 2008

Hardox bottom floor plate only

Variable channel pressure control

Plastic valve

Hydraulic pump driven by frequency inverter

Anti-rat cabling

Oil in-depth filtration

Modem

Hours 40.000

This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee.

Contact us for more information or a quotation.

General principles of refurbishment

Cleaning & disassembly
Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop.

Tolerances
After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components;
• Ram,
• Frame,
• Channel,
• Pre-press-flap

After disassembly and inspection the ram is welded-up again and fitted with new ram wheels.

The protective grids and the pre-press flap are made dent-free and repaired where necessary.

Repainted
After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again.

Kljdotvau Aepfx Abtew
Hydraulics:
The hydraulic tank is cleaned.
The hydraulic lines & hoses are replaced.
The hydraulic components are repackaged.
The hydraulic oil is replaced.

Cabling:
All cabling is checked and replaced if necessary.
All junction boxes are replaced and placed back in easily accessible positions.

Wear parts:
All wearing parts are replaced.
The pins and shafts of the cylinders and the channel are replaced with new ones.
All wearing parts of (both) needle installations and knotters are replaced for new.

Cylinders:
The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod.

MCC Cabinet
The switch box is checked and cleaned.
If necessary, electronic components are replaced with new ones.
The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.