آلة التثقيبBobst
Autoplatine Speria 106 E
آلة التثقيب
Bobst
Autoplatine Speria 106 E
سنة الصنع
٢٠٠٦
الحالة
مستعمل
الموقع
Hlavní město Praha 

البيانات الأساسية
- اسم الماكينة:
- آلة التثقيب
- الشركة المصنعة:
- Bobst
- طراز:
- Autoplatine Speria 106 E
- سنة الصنع:
- ٢٠٠٦
- الحالة:
- جيد جدًا (مستعمل)
السعر والموقع
- الموقع:
- Jezkova 1054/10, 13000 Praha 3, Česká republika

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A20248585
- تحديث:
- آخر مرة في 08.12.2025
وصف
Bobst Autoplatine Speria 106 E
STANDARD EQUIPMENT
MACHINE
- Centerline system for quick job changeover.
- Electronic sheet travel monitoring system.
- Adjustable centering at the stripping station.
- Control cabinet air conditioning unit.
- Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic).
This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components.
- Main motor with frequency inverter control.
FEEDER
- Pile tray with handle for easy manual lateral alignment during production.
- Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped.
- Automatic pile lifting controlled by pressing foot.
- Rear pile guides (operator side and opposite operator side).
- Adjustable side blowers with Centerline markings.
- Suction unit.
FEED TABLE
- Feed table with anti-static stainless steel covering.
- Feed table entrance equipped with lateral ramps.
- Four front lays, pairwise adjustable, with front register control.
- "Pull" guide (operator side), adjustable with Centerline markings and side register control.
- Double sheet detector.
- Support plates at platen station entry.
- Sheet hold-down mechanism (guides sheets to front lays).
- Upper frame with manual lifting device.
- Upper transport system for paper, paperboard, and corrugated board.
- Transport belts with lateral guides and automatic tensioning system.
PLATEN
- Gripper reopening device.
- Centering and locking for equipment.
- Locking the chase to the upper beam.
- Cutting force measurement with strain gauge.
1 synthetic supporting plate.
1 upper chase: fixed bottom plate.
1 cutting plate.
WASTE STRIPPING STATION
- Air-cylinder-driven upper frame lifting.
1 upper pull-out frame (with crossbars and clamps).
1 lower pull-out frame.
Kedpfjxl Talox Aphsdw
DELIVERY
- Pile tray.
- Front jogger.
- Adjustable rear and side joggers with Centerline markings.
- Braking brush.
- Manual non-stop rack.
AVAILABLE EXTRAS
B MACHINE
1 B-1 Raised machine base
C FEEDER
1 C-4 Manual non-stop device
E PLATEN
1 E-5 Compensating plate
1 E-55 Micro-adjustable supporting plate centering
F WASTE STRIPPING STATION
1 F-31 Quick-lock device for the upper pull-out frame
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
STANDARD EQUIPMENT
MACHINE
- Centerline system for quick job changeover.
- Electronic sheet travel monitoring system.
- Adjustable centering at the stripping station.
- Control cabinet air conditioning unit.
- Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic).
This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components.
- Main motor with frequency inverter control.
FEEDER
- Pile tray with handle for easy manual lateral alignment during production.
- Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped.
- Automatic pile lifting controlled by pressing foot.
- Rear pile guides (operator side and opposite operator side).
- Adjustable side blowers with Centerline markings.
- Suction unit.
FEED TABLE
- Feed table with anti-static stainless steel covering.
- Feed table entrance equipped with lateral ramps.
- Four front lays, pairwise adjustable, with front register control.
- "Pull" guide (operator side), adjustable with Centerline markings and side register control.
- Double sheet detector.
- Support plates at platen station entry.
- Sheet hold-down mechanism (guides sheets to front lays).
- Upper frame with manual lifting device.
- Upper transport system for paper, paperboard, and corrugated board.
- Transport belts with lateral guides and automatic tensioning system.
PLATEN
- Gripper reopening device.
- Centering and locking for equipment.
- Locking the chase to the upper beam.
- Cutting force measurement with strain gauge.
1 synthetic supporting plate.
1 upper chase: fixed bottom plate.
1 cutting plate.
WASTE STRIPPING STATION
- Air-cylinder-driven upper frame lifting.
1 upper pull-out frame (with crossbars and clamps).
1 lower pull-out frame.
Kedpfjxl Talox Aphsdw
DELIVERY
- Pile tray.
- Front jogger.
- Adjustable rear and side joggers with Centerline markings.
- Braking brush.
- Manual non-stop rack.
AVAILABLE EXTRAS
B MACHINE
1 B-1 Raised machine base
C FEEDER
1 C-4 Manual non-stop device
E PLATEN
1 E-5 Compensating plate
1 E-55 Micro-adjustable supporting plate centering
F WASTE STRIPPING STATION
1 F-31 Quick-lock device for the upper pull-out frame
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2017
١٠ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+420 229 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Schwalmtal
٣٬٤١٣ km
ماكينة التخريم
SanwaTRP-1150-SCB
SanwaTRP-1150-SCB
ناجح
تم إرسال رسالتك.
إعلان صغير
Leinfelden-Echterdingen
٣٬٠٦٨ km
FGT لتقنيات الطباعة - آلة تقطيع القوالب
BOBSTSP 104E
BOBSTSP 104E
ناجح
تم إرسال رسالتك.
إعلان صغير
Radom
٢٬٨٥٣ km
آلة طي
Heidelberg Cylinder S 54×72Automatic Die-Cutting Machine
Heidelberg Cylinder S 54×72Automatic Die-Cutting Machine
ناجح
تم إرسال رسالتك.
إعلان صغير
Zaandam
٣٬٥٧٩ km
آلة تقطيع القوالب
HeidelbergEasymatrix 106 CS
HeidelbergEasymatrix 106 CS
ناجح
تم إرسال رسالتك.
إعلان صغير
Zaandam
٣٬٥٧٩ km
آلة طباعة أوفست
HeidelbergCX 102-5 L
HeidelbergCX 102-5 L
ناجح
تم إرسال رسالتك.
إعلان صغير
София
١٬٨٩١ km
آلة طباعة أوفست
Man Roland708 P 1998 - FOR SPARE PARTS
Man Roland708 P 1998 - FOR SPARE PARTS
ناجح
تم إرسال رسالتك.
إعلان صغير
Leinfelden-Echterdingen
٣٬٠٦٨ km
ماكينات الجرافيك FGT - مطبعة الملصقات
GALLUSEM 410
GALLUSEM 410
ناجح
تم إرسال رسالتك.
إعلان صغير
Stavanger
٤٬٠٦٤ km
آلة الطي والتلصيق
PetrattoMini metro (x2)
PetrattoMini metro (x2)
ناجح
تم إرسال رسالتك.
إعلان صغير
Emskirchen
٣٬٠٥٥ km
آلة قطع بالقالب بأسطوانة للطباعة بالحروف
HeidelbergSBB
HeidelbergSBB
ناجح
تم إرسال رسالتك.
إعلان صغير
Leinfelden-Echterdingen
٣٬٠٦٨ km
FGT للآلات الطباعية - طباعة الملصقات الرقمية + التشطيب
XEIKON+GMCX500+DCV finis.
XEIKON+GMCX500+DCV finis.
تم حذف إعلانك بنجاح
حدث خطأ






































































