مركز تشغيل CNC بيسه روفر C 9.50 (2007)Biesse
Rover C 9.50
مركز تشغيل CNC بيسه روفر C 9.50 (2007)
Biesse
Rover C 9.50
سنة الصنع
٢٠٠٧
الحالة
مستعمل
الموقع
ألمانيا 

البيانات الأساسية
- اسم الماكينة:
- مركز تشغيل CNC بيسه روفر C 9.50 (2007)
- الشركة المصنعة:
- Biesse
- طراز:
- Rover C 9.50
- سنة الصنع:
- ٢٠٠٧
- الحالة:
- مستعمل
السعر والموقع
- الموقع:
- , ألمانيا

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A22564722
- رقم المرجع:
- WEHRMANN-0401907
- تحديث:
- آخر مرة في 17.08.2026
وصف
- Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm
- CE safety devices
- 8 ATS plate holders - L = 1525 mm - 24 sliding rails
- Automatic positioning of 8 plate holders and sliding rails (EPS X-Y)
- Conveyor belt for removing chips and scrap
- Pneumatic locking system, divided into 2 working areas in X
- 8 rear reference stops with a stroke of 115 mm
- 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm)
- 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm)
- 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
- 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
- Sensor for detecting lowered stops.
- Pneumatic system for lifting rod holders.
- 6 lifting rod holders for easy loading - H = 74 mm modules.
- Vacuum system for a 250 m3/h pump
- 250 m3/h rotary vane vacuum pump for standard vacuum system
Composition C3-A1
- Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit.
- Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position.
Composition C3-P2
- Additional Z-slide for rear work units, controlled by an independent Z-axis
Itjdpfozux Nwex Acgjp
- 16 vertical and 4 horizontal drilling spindles in the Y direction
- Chain-type tool changer with 22 positions at 180 mm center distance
- Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer
- RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle
- Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head.
- Automatic lubrication system
- Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions.
Note:
- Additional overhauled 5-axis main spindle
- 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
- CE safety devices
- 8 ATS plate holders - L = 1525 mm - 24 sliding rails
- Automatic positioning of 8 plate holders and sliding rails (EPS X-Y)
- Conveyor belt for removing chips and scrap
- Pneumatic locking system, divided into 2 working areas in X
- 8 rear reference stops with a stroke of 115 mm
- 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm)
- 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm)
- 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
- 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
- Sensor for detecting lowered stops.
- Pneumatic system for lifting rod holders.
- 6 lifting rod holders for easy loading - H = 74 mm modules.
- Vacuum system for a 250 m3/h pump
- 250 m3/h rotary vane vacuum pump for standard vacuum system
Composition C3-A1
- Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit.
- Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position.
Composition C3-P2
- Additional Z-slide for rear work units, controlled by an independent Z-axis
Itjdpfozux Nwex Acgjp
- 16 vertical and 4 horizontal drilling spindles in the Y direction
- Chain-type tool changer with 22 positions at 180 mm center distance
- Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer
- RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle
- Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head.
- Automatic lubrication system
- Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions.
Note:
- Additional overhauled 5-axis main spindle
- 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
إرسال طلب
هاتف & فاكس
+49 5263 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Kecskemét
٢٬٤٤٣ km
مركز تشغيل
BIESSERover C 9.50
BIESSERover C 9.50
ناجح
تم إرسال رسالتك.
إعلان صغير
إيطاليا
٢٬٣٦٠ km
منشار اللوحة - التحميل من الأمام
BIESSESEKTOR 450
BIESSESEKTOR 450
ناجح
تم إرسال رسالتك.
إعلان صغير
Ponte di Piave
٢٬٦٥٧ km
مركز تشغيل
BIESSEROVER C 9.50 CONF. 3
BIESSEROVER C 9.50 CONF. 3
ناجح
تم إرسال رسالتك.
إعلان صغير
إيطاليا
٢٬٣٦٠ km
مركز تصنيع 5 محاور
BIESSEROVER C 9.50
BIESSEROVER C 9.50
ناجح
تم إرسال رسالتك.
إعلان صغير
Kežmarok
٢٬٦٣٩ km
مركز تشغيل نوافذ زاوي
WeinigUnicontrol 10
WeinigUnicontrol 10
ناجح
تم إرسال رسالتك.
إعلان صغير
Wijchen
٣٬٤٨٤ km
آلات التشكيل الرباعية الجوانب Weinig Unimat 500 سنة 2006
WeinigUnimat 500
WeinigUnimat 500
ناجح
تم إرسال رسالتك.
إعلان صغير
Schwanberg
٢٬٦٠٨ km
مكبس التسوية
SCMS 52
SCMS 52
ناجح
تم إرسال رسالتك.
إعلان صغير
Colonnella
٢٬٣٥٤ km
منشار متعدد الشفرات
TrademakSQUALO 515 LM
TrademakSQUALO 515 LM
ناجح
تم إرسال رسالتك.
إعلان صغير
ألمانيا
٣٬٣٣٦ km
مركز تشغيل CNC من نوع BIESSE ROVER A Edge 1643 (سنة الصنع 2017)
BIESSEROVER A Edge 1643
BIESSEROVER A Edge 1643
ناجح
تم إرسال رسالتك.
إعلان صغير
Gerolzhofen
٣٬١٠٦ km
مكبس التسوية
HOFMANNDH510-2
HOFMANNDH510-2
تم حذف إعلانك بنجاح
حدث خطأ





















































































































































