آلة حقن صبBattenfeld
R60/125H Vertikal Rundtisch Mehrstatione
آلة حقن صب
Battenfeld
R60/125H Vertikal Rundtisch Mehrstatione
سنة الصنع
٢٠٠٧
الحالة
مستعمل
الموقع
Hannover 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- آلة حقن صب
- المصنّع:
- Battenfeld
- سنة الصنع:
- ٢٠٠٧
- الحالة:
- جيد جدًا (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٢٠٬٣٥٧ h
السعر والموقع
- الموقع:
- 30 Hannover, Deutschland

اتصل
تفاصيل فنية
- قوة التثبيت:
- ٦٠٠ كيلو نيوتن
- قطر البرغي:
- ٢٥ مم
- حجم الإزاحة:
- ٥٩ سم³
- وزن الحقن:
- ٥٦ g
- الوزن الإجمالي:
- ٦٬٠٠٠ كجم
- معدات:
- توثيق / دليل
تفاصيل العرض
- معرّف القائمة:
- A20652890
- التحديث الأخير:
- في ٠١.١٢.٢٠٢٥
الوصف
Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine dealership.
Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards.
We have been a wholesale supplier of used injection moulding machines for over 25 years.
Current note – Tax information and benefit for used machines:
As of 01.07.2025, used machines may also be depreciated using the special 30% annual depreciation allowance. In addition to the lower purchase cost compared to a new machine, you can claim the same depreciation amounts as for a new machine.
Reference: Growth Booster (§ 7 Section 2 EStG-E)
Vertical injection moulding machine – thermoplastics, with rotary table, 2 or 4 stations
Manufacturer: Battenfeld
Model: Vertikal R 60 / 125 H
Control: B4
Year: 2007
Machine number: 130953 – 100
Vertical machine with rotary table / 2-4 stations (750 mm)
Operating hours: 20,357 h
Injection unit (125)
Screw diameter: 25 mm
Screw length: 21.6 L/D
Shot volume: 58.9 cm³
Shot weight: 53.6 g
Heating capacity: 6.78 kW
Heating zones: 4
Isdpfsx Ak I Isx Aacoa
Nozzle stroke: 200 mm
Injection pressure: 2,149 bar
Clamping unit
Clamping force: 60 tons / 600 kN
Opening stroke: 250 mm
Min. mould installation height: 250 mm
Ejector stroke: 150 mm
Max. platen distance: 500 mm
Rotary table diameter: 1,040 mm
Weight: 6,000 kg
Extras:
- Light curtain
- Automatic suction loader Simar FX 2504, year 2013
- Water manifold
- Air valve
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards.
We have been a wholesale supplier of used injection moulding machines for over 25 years.
Current note – Tax information and benefit for used machines:
As of 01.07.2025, used machines may also be depreciated using the special 30% annual depreciation allowance. In addition to the lower purchase cost compared to a new machine, you can claim the same depreciation amounts as for a new machine.
Reference: Growth Booster (§ 7 Section 2 EStG-E)
Vertical injection moulding machine – thermoplastics, with rotary table, 2 or 4 stations
Manufacturer: Battenfeld
Model: Vertikal R 60 / 125 H
Control: B4
Year: 2007
Machine number: 130953 – 100
Vertical machine with rotary table / 2-4 stations (750 mm)
Operating hours: 20,357 h
Injection unit (125)
Screw diameter: 25 mm
Screw length: 21.6 L/D
Shot volume: 58.9 cm³
Shot weight: 53.6 g
Heating capacity: 6.78 kW
Heating zones: 4
Isdpfsx Ak I Isx Aacoa
Nozzle stroke: 200 mm
Injection pressure: 2,149 bar
Clamping unit
Clamping force: 60 tons / 600 kN
Opening stroke: 250 mm
Min. mould installation height: 250 mm
Ejector stroke: 150 mm
Max. platen distance: 500 mm
Rotary table diameter: 1,040 mm
Weight: 6,000 kg
Extras:
- Light curtain
- Automatic suction loader Simar FX 2504, year 2013
- Water manifold
- Air valve
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
تقديم الطلب
الهاتف & فاكس
+49 5121 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ































