غسالة الزجاجات

ATES Giorgia 01 – 165-14-100-92-1

Technical Summary and Application Scope – ATES Giorgia 8000 bph


The ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.


Main Technical Data




Type: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.


Nominal output capacity: up to 8,000 bottles/hour depending on bottle format, contamination level, and line configuration.


Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.


Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.


Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.


Installed electrical power: approx. 20 kW.


Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).


Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.


Drainage: integrated rinse and tank drainage via 2″ pipeline.


Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.


Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.


Filtration: internal filtration plus 0.2 μm microfiltration for process water.


Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.




Dkjdpfx Aaoxqmqzo Esk
System Architecture and Process Flow




Returnable bottle cycle (full washing and rinsing)



Automatic loading into baskets via push bars.


Pre-wash spray to remove dirt and label residues.


Immersion in hot caustic bath to disintegrate adhesives and organic matter.


High-pressure internal and external washing through jetting manifolds.


Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.


Continuous label and debris extraction with filtration to prevent clogging.




New bottle cycle (rinsing only)



Spray pre-wash.


Pre-treatment with detergent solution.


Internal and external washing as required.


Multi-stage rinsing and transfer to filling or storage.




Immersion and label management stage



Pre-wash and wash for removal of labels and residues.


Sequential immersion and spray jets with controlled dosing and temperature.