خزان ضغط قابل للتسخين/التبريد بسعة 1500 لتر مصنوع من الفولاذ المقاوم للصدأ V2AALFA-LAVAL
8191
خزان ضغط قابل للتسخين/التبريد بسعة 1500 لتر مصنوع من الفولاذ المقاوم للصدأ V2A
ALFA-LAVAL
8191
سعر ثابت دون ضريبة القيمة المضافة
٥٬٧٥٠ €
الحالة
مستعمل
الموقع
Bremen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٥٬٧٥٠ €
- الموقع:
- Bremen
اتصل
تفاصيل فنية
- سعة الخزان:
- ١٬٥٠٠ ل
تفاصيل العرض
- معرّف القائمة:
- A20349775
- الرقم المرجعي:
- 8191
- التحديث الأخير:
- في ٢٣.١٠.٢٠٢٥
الوصف
GENERAL
Features: Evacuation/Aeration, butterfly valve
Design: vertical
Remarks: Height-adjustable cap screws for the feet are missing; hand lever for the butterfly valve is missing; manway cover is not suitable for an operating pressure of 2 bar (the tank was most likely operated unpressurized by the previous owner and thus the cover was replaced accordingly)
Outer diameter: 1,300 mm
Inner diameter: 1,150 mm
Total height: 2,700 mm
Heating/Cooling: present
Insulation: present
Max. permissible operating temperature: 20 °C
Max. permissible operating overpressure: 3.0 bar
Max. overpressure: 2.0 bar
Ledpfxsxqa Ito Abxeah
Agitator: agitator flange
Support type: feet
Location: Bremen
Cylinder temperature control: half-pipe coil
Nameplate:
Volume: 1,500 litres
Product-contact material: V2A 1.4301 (AISI304)
Condition: used
Cylindrical height: 1,550 mm
Last application: dairy
TANK
Max. operating temperature tank / °C: 120 °C
Bottom: flat bottom with slope
Number of feet: 3 units
HEATING/COOLING JACKET
Bottom temperature control: Thermoplate
INSULATION
Insulation jacket: hermetically welded
Insulation jacket material: stainless steel
FEATURES
Manway / dome: on top (Ø 430)
Outlet: DN65 DIN 11851
Note: dents on the insulation jacket, functionality of the double jacket not tested
MATERIAL SPECIFICATION
Temperature control system material: V2A 1.4301 (AISI304)
Feet material: stainless steel
AGITATOR
Agitator arrangement: off-centre on top
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Features: Evacuation/Aeration, butterfly valve
Design: vertical
Remarks: Height-adjustable cap screws for the feet are missing; hand lever for the butterfly valve is missing; manway cover is not suitable for an operating pressure of 2 bar (the tank was most likely operated unpressurized by the previous owner and thus the cover was replaced accordingly)
Outer diameter: 1,300 mm
Inner diameter: 1,150 mm
Total height: 2,700 mm
Heating/Cooling: present
Insulation: present
Max. permissible operating temperature: 20 °C
Max. permissible operating overpressure: 3.0 bar
Max. overpressure: 2.0 bar
Ledpfxsxqa Ito Abxeah
Agitator: agitator flange
Support type: feet
Location: Bremen
Cylinder temperature control: half-pipe coil
Nameplate:
Volume: 1,500 litres
Product-contact material: V2A 1.4301 (AISI304)
Condition: used
Cylindrical height: 1,550 mm
Last application: dairy
TANK
Max. operating temperature tank / °C: 120 °C
Bottom: flat bottom with slope
Number of feet: 3 units
HEATING/COOLING JACKET
Bottom temperature control: Thermoplate
INSULATION
Insulation jacket: hermetically welded
Insulation jacket material: stainless steel
FEATURES
Manway / dome: on top (Ø 430)
Outlet: DN65 DIN 11851
Note: dents on the insulation jacket, functionality of the double jacket not tested
MATERIAL SPECIFICATION
Temperature control system material: V2A 1.4301 (AISI304)
Feet material: stainless steel
AGITATOR
Agitator arrangement: off-centre on top
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2019
تقديم الطلب
الهاتف & فاكس
+49 421 5... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ